Cattle Bar Net Fence

Edit the barracks Technical Quality Indicators of Barrage The material is made of 9cm × 9cm × 9mm × 220cm hot bar and other corners of the angle, the column with 4cm × 4cm × 4mm × 190cm equilateral angle iron for the grid fence need to set up eight hanging network Hole, from the top and bottom under the spacing of 20cm, 22cm, 22cm, 18cm, 18cm, 15cm, 15cm, reinforced column material specifications: 7cm × 7cm × 7mm × 220cm hot bar and other corners of iron, hanging wire hole hole. Ground anchor iron reinforced pile material specifications: 4cm × 4cm × 4mm × 40cm × 60 hot bar and other corners of the iron bar rail door specifications structure requirements of the fence door for the iron, single fan width of 2.5 meters, 1.2 meters in height, easy Vehicle access. The frame is welded with 1 inch steel pipe, and the wire is made of φ5 cold wire welding, which is not twisted and not deformed. The barbed wire column set up technical standards: two-phase hanging line between the pile spacing of 5 meters - 10 meters, above to set up a thorn line; barbed wire fence two-phase hanging between the piles of 5 meters, to add cross line. In the large section of the bend, according to the size of the curvature of the equipment barbed bar spacing. The depth of the laying of the barn column is 60-65cm. Strengthen the structure (1) in a flat area straight fence, the length of 50 meters within the use of single-span terminal structure, the length of 50-200 meters between the use of double-span terminal structure, the length of more than 200 meters, the use of double-span " "The total length of the fence is divided into parts of not more than 200 meters. (2) in the ups and downs of the linear fence, the reinforcement structure is located at the top of the hill and the foot of the mountain, set the requirements with the flat buried straight fence. Every 100 meters, should be set to strengthen the pile and support pile