Standards: ISO 2858/ ISO 5199
Operating Parameters: Capacity Q: up to 2000 m³/h ( 8800 gpm )/ Head H: up to 160 m ( 525 ft )/ Pressure P: up to 2.5 MPa ( 363 psi )/ Temperature T: -30 to 180 ℃ ( -20 to 356 ℉ )
Features:Standard modularization design/ The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position. The driver
does not need to be removed if a spacer coupling is used/ The standard seal arrangement has three options: gland packing,single mechanical seal and double seal/ GB9113.1-2000 PN 2.5MPa suction
and discharge flanges are standard. Other standards may also be required by the user / The pump rotation is clockwise when looking from the drive end./ Jack screws (motor side) for an easier
alignment setting
