Gz-11/0.36-6 Nitrogen Compressor/Oxygen Compressor/Carbon-Dioxide Compressor/Diaphragm Compressor

The diaphragm compressor structure is mainly composed of motor, base, crankcase, crankshaft linkage mechanism, cylinder components, crankshaft connecting rod, piston, oil and gas pipeline, electric control system and some accessories. When your company needs to inquire about the compressor, please provide the following parameters so that our company can provide you with an accurate model or solution in a timely manner. 1. Inlet pressure: the pressure value of the square gas source (the pressure loss in the pipeline between the gas source and the suction port of the diaphragm compressor is not considered for the time being); 2. Exhaust pressure: also called outlet pressure, which is the working pressure required by the buyer's system; 3. Intake temperature: the temperature of the air source of the buyer (the temperature loss in the pipeline between the air source and the inlet of the diaphragm compressor is not considered for the time being); 4. Exhaust temperature: Also called outlet temperature. That is, the temperature measured at the outlet of the diaphragm compressor after the gas is compressed should be lower than the temperature allowed by the compression medium; 5. Air supply temperature: It is also called the temperature of the exhaust gas after cooling. The high temperature gas discharged from the exhaust port of the diaphragm compressor is cooled by the cooling system provided by the compressor and used by the buyer; 6. Compressed medium: or compressed gas, if it is a mixed gas, the components of the mixed gas should be provided, the proportion of various components in the mixed gas, and the characteristics of the compressed medium should be provided; 7, Volume flow:  that is, the above-mentioned suction pressure, exhaust pressure, the gas volume required per unit time, generally under standard conditions, that is: the standard gas volume per hour ( Nm3 / h); 8. Electrical explosion-proof level, specific requirements and special requirements for self-control of diaphragm compressors; 9. When ordering from abroad, the voltage and frequency of the power supply should be specified.