Packed Bed Scrubber

Exhaust gas treatment equipment - waste gas scrubber, spray tower, washing tower, Polyhedral ball packing: 1. Equipment introduction:      The washing tower is a new type of industrial waste gas treatment equipment, which is widely used in industrial waste gas and dust removal, acid and alkali waste gas, painting industry, printing industry, pharmaceutical industry and other fields, the most commonly used and most practical processing equipment. It can effectively process HCL, HF, NH3, H2SO4, CrO3, HCN, NAOH, H2S, HCHO, etc. Various industrial organic waste gases and inorganic waste gases. 2. Structure and working principle      The industrial waste gas enters the washing tower and is in full contact with the washing liquid in the tower to generate a neutralization reaction to achieve the treatment purification effect, effectively remove dust and other various gases, and finally meet the discharge requirements. 3.The equipment features: 1. Low noise, stable operation, simple operation, low cost, etc. 2. In addition to high dust efficiency, it can handle various gases by using syrup and water. 3. Using high-quality PP sheet, corrosion-resistant, anti-aging, long service life, and can be customized according to requirements; 4. Technical Parameter Table : Air volume (M3/H) Size (mm) THK (mm) Drain outlet (mm) Water tank size(mm) Inlet and  outlet size (mm) Pump (KW) Wind resistance  (Pa) 3000 800    8    DN32 600*700*H700      315 0.75 500 5000 1000    8    DN40 600*800*H700      400  1.5  500 8000 1200    8    DN40 600*1000*H700      500  2.2 500 10000 1500   10    DN40 700*1000*H700       550  2.2 500 12000 1600   10    DN50 700*1000*H700      600 3.75 500 15000 1800   10    DN50 700*1200*H700      650 3.75 500 20000 2000   10    DN50 700*1200*H700      750  5.5 500 25000 2200   10    DN50 700*1200*H700      950  5.5 600 30000 2500   12    DN65 700*1200*H700     1000  5.5 600 35000 2700   12    DN65 1000*700*H700     1100 7.5 600 40000 2900   12    DN65 1000*700*H700     1200 7.5 600 45000 3000   12    DN65 1000*700*H700     1250  7.5 600 1.This form is a common size and we can customize different sizes and requirements according to your needs. 2.The material is polypropylene. 3.Equipment design wind speed 1.8m/s