Glicerol Monoestearato 40% (GMS 40)

1. As emulsifier: Because it is the king of food emulsifier is widely used in food development, natural beverage, cake oil, ice cream, Chewing Gum, toffee, shortening, margarine, etc., is to produce excellent, high-quality food emulsifier ideal. 2. As cosmetics additive ideal-type is widely used in sunscreen cream, face esters, skin brightener, products can paste and smooth, stable homogeneous. 3. As emulsion can be used as the carrier of Chinese medicine, made of paste, cream, liniment, in order to enhance dispersion and stability of the dispersed phase. 4. AS foam agent, anti-shrinkage: Plastic foam is an ideal auxiliary aids and anti-shrinkage agents. In order to adapt to the requirements of environmental protection, CFC-type blowing agent will gradually be eliminated. Plastic Additives can be used as high-foam polyethylene, polystyrene foam additives, such as butane blowing agent with the same use, have very good results. Moreover, the application of plastics additives products plastic foam surface is very smooth and clean bright, no shrinking. 5. AS lubricat, anti-static: DMG-95 is in excellent lubricant, to reduce friction between the polymer molecules, thereby reducing the polymer melt viscosity, improve their mobility. Plastic Additives with good compatibility with resin, easy to spread, for the advantages of transparent products. Plastic anti-static additive effect is very marked, plastic products can be reduced by the formation and accumulation of static electricity to make plastic products to reduce the dust absorption, and maintain the transparency of products and surface cleaner appearance. 6. As anti-atomization, anti-drip: The surface of agricultural plastic film atomization is not only impede the sun's radiation, and condensation of water onto the crops, would seriously undermine the growth of crops. Plastic Additives can have a very good efficacy against aerosol, through its role in surfactant so easy moist surface membrane, condensation of water can flow Shun film, avoid direct fall. 7. As plasticized, help Modified: DMG-95 on Polyethylene (PE), polypropylene (PP) Polyvinyl Chloride (PVC), polystyrene (PS) and other plastic raw materials have good compatibility, application of plastic Po can improve product flexibility, more beautiful appearance. Plastics additives for cellulose nitrate, alkyd resins, nylon products, engineering plastics, such as plasticizers, modifiers, the effect is particularly significant. Following is the details: 1. Taking one agent of molecular distilled monoglyceride in vessel and heating it by electric cooker or other ways still it become to liquation. 2. Taking 4-5 hat water (about70) in homo mixer or beating machine start to stir the hot water (Attention please: The hat water should be stirred drastically). 3. Slowly put the liquation of molecular distilled monoglyceride in hot water which is stirring in beating machine (If the beating machine is good you can put bead or powder of molecular distilled monoglyceride in it). After stirring, it becomes milk white ointment(hydrate)and you can use it after it is cooling to room tmperature. 4. You'd better adopt the third method to use molecular distilled monoglyceride because its efficiency is the best. The reason is when molecular distilled monoglyceride become to hydrate its surface is 700 times of the powder of molecular distilled monoglyceride which is become by nnebula time. It is propitious to disintegration in waterbase for molecular distilled monoglyceride. Dosage: Dosage: 0.3~0.5%(according to the weight of raw material). Please add 1~5% molecular distilled monoglyceride in it if oil or protein is much as it contains some raw material what can not be emulsified easily.