Quick Details
- Processing Time:10 days
- Port:Ho Chi Minh
- Supply Ability: 10000 Pieces Per Month
- Brand Name:-
VHB Pot Bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) in compliance with standards
TCVN 10268 : 2014, AASHTO LRFD: 2007 – Section 18, ASTM D
5212 – 03, BS5400, EN1337, KS4420. VHB Bearings are capable of withstanding high loads, displacements and
rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with a load capacity of up to 60000kN or above depending on projects’
requirements. VHB pot bearings have well-shaped structure, superior design, which are convenient for installation and maintenance during operation
VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The
elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding
the forces and allows the movement as well as rotation along horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part
can be designed to limit or allow the movements as required from the structures.
Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings.
Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer
the pressure through a fixed point.
Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings,
which allows the dead to have both rotary movements and unidirectional or multidirectional movements.
To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following
methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot
dip galvanization according to ASTM A123 standards and especially the Al – Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the
anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours