Quick Details
- Processing Time:usually for one month
- Port:Tianjin
- Supply Ability: 10000 Tons Per Year
- Brand Name:MengZhou
graphite rods
The graphite electrode is
mainly made of petroleum coke and needle coke, and the coal asphalt is used as a binder. It is made by calcination, distributing, kneading, forming, roasting, graphitization and machining.
Graphite electrode series
products are made of high quality carbon materials.The main products are: RP
graphite electrode, smelting
furnace shaped carbon block, impregnated graphite electrode,
high power graphite electrode, graphite
crucible, electrode paste, recarburizer, and
non-standard specifications of shaped carbon products.
PRODUCT DESCRIPTION
Name: Fine-Graphite
Rod
Model: Fine-grained
150mm
Particle Size: Max
0.8
Introduction
The
graphite electrode is mainly made of petroleum coke
and needle coke, and the coal asphalt is used as a binder. It is made by calcination, distributing, kneading, forming, roasting, graphitization and machining. It's a conductor which release
electric energy in the form of electric arc in the electric arc furnace heats and melts the material. the charge can be divided into a regular power graphite electrode, a high power graphite
electrode and an ultra high power graphite electrode according to its quality index. The main raw material for graphite electrode production is petroleum coke. The regular power graphite
electrode can be added with a small amount of pitch coke. The sulfur content of petroleum coke and pitch coke cannot exceed 0.5%. Needle coke is also required for the production of high power or
ultra high power graphite electrodes.
Advantage
The advantage of graphite
electrode is that it is easy to process, the electricity discharge processing rate is high, and the graphite loss is small.
Production
characteristics
To be requiring multiple
roasting and impregnation. Mainly used for making various graphite fittings, etc. We can be produced Φ150-400mm fine graphite rods.
Application
Mainly used in electric arc
steelmaking furnaces, refining furnaces, industrial silicon furnaces, yellow phosphorus furnaces, electric resistance furnaces, etc., as conductive usage. The graphite electrode blank is also
used to process a variety of shaped graphite products such as enamel, mold, boat and heating element.
DIRECTIONS FOR USE OF
GRAPHITE ELECTRODES
1. When the Graphite
Electrodes are selected for electric steel furnace, reference is made to the Current Carrying Capacity of the Electrodes.
2. The transport and storage
of the Graphite Electrodes must be kept away from being moistened or wetted by rain, snow and water. Be sure to dry them up before use .
3. During loading, unloading
and transportation, the Graphite Electrodes must be handled with great care to protect the threads from being damaged by collision. In the course of loading, unloading and hoisting, it is
advisable to use special hoist tools.
4. Before the electrodes are
connected to the nipples, it is necessary to blow the electrode threads thoroughly clean with compressed air and screw the nipples tightly then into the electrodes.
5. The terminal faces of the
two electrodes tightly screw-connected must be kept in close contact.
6. When the elevator of the
electric arc furnace is hoisting the electrodes, no swing is allowed so as to avoid the electrode joints being loosened and dislocated.
7. The tightening devices of
the electrodes must not hold the electrode near the area of nipple sockets.
8. In order to prevent the
breakage of the electrodes in case of scrap cave-ins, lift the electrodes in time according to the melting condition and dump the unmelted waste steel into the pool.
9. Charging the furnace, put
the large scrap steel lumps at the bottom and the small ones at the top.
10. In order to prevent
dislocation after the electrodes being jointed, we provide binding paste and pins which is easily to be applied.
For making constant
improvement of our electrode products so as to serve our customers better, please always keep us informed of your opinions and requirements.