Jaw Crushers VIBROTECHNIK

The Jaw crushers are designed to crush brittle bulk materials of various strength and hardness. In the Jaw crushers, the material particles are broken down by the compressive and shear strains between the fixed and moving jaws. The grain size of the crushed material is determined by the gap between the jaws in the lower part (the discharge slot) and the physical properties of the material.   Jaw crusher JC 6М is designed for crushing small samples of material in laboratories with low and medium workloads. The small size, low weight and electric motor power make it possible to use the JC 6М in mobile laboratories, in low-capacity process installations and in geological surveying. Jaw crusher JC 10М is a more powerful model of the laboratory-class equipment, used for continuous crushing of material in small and medium-sized facilities. When it is equipped with a support stand with a collecting container, it can be used for intermittent crushing of samples. Jaw crusher JC 15 is a high-power model designed for busy laboratories or small production facilities. The increased wall thickness, 5.5 kW electric motor and durable bearings make it possible to operate the JC 15 continuously with minimal process interruptions. Advantages of VIBROTECHNIK Jaw crushers: The complex movement of the jaw (primarily horizontal vibrations in the upper part of the crushing zone and vertical vibrations in the lower part) provides a high degree of crushing; The walls of the housing in the crushing zone are protected by durable steel liners; The interchangeability of the fixed and moving jaws increases their service life; The configuration of the loading hopper and cover and the connection to a dust removal system prevent crushed material from being ejected and reduce dust; There is a hinged (removable) loading hopper for easy cleaning of the crushing chamber and monitoring of the gap between the jaws; The attachment of the jaw wedges to the ends of the base and the crank arm prevents damage to the attachment, allowing the jaws to be easily replaced; Easy adjustment of the V-belt drive by a rotating slide plate; Housings, limit microswitches and an emergency stop ensure limited access to the drive parts of the crusher and safe operation; The use of a large-diameter support thread in the adjustment device reduces the likelihood of it jamming; Patented designs. Patent for utility model No. 159277 of September 24, 2015. Applications: ferroalloys, ore, slag, granite, marble, limestone, coal, coke, glass, ceramics, opal. Industries: mining, metallurgy, construction, chemical, pharmaceutical. Characteristics JC 6 JC 6М   JC 10   JC 10M   JC 15   Loading door dimensions (mm) 60х100 60х100 100х200 100х200 150х250 Maximum initial material grain size (mm) 50   50   70   70 110   Discharge slot adjustment range (mm) 2-25  2-25 3-25 3-25 1-25   Average product particle size at minimum aperture (mm) 90%<2    90%<2   90%<2,5 90%<2,5 90%<1   Maximum output (kg/hour) 200 200   500 500 1000   Collecting container / tank volume (L) 2,1 / 1,6 2,4 / 1,9  24/16 24/16 14/9  Electric motor power (kW) 1,1 1,1 2,2 2,2 5,5 50 Hz supply voltage (V) 380 380 380 380 380 Overall dimensions (Length x Width x Height / with stand) (mm) 640х340х600 / 1090 645х340х610 / 1100 740х475х630 / 1105 710х490х620 / 1090 1000х570х960 Weight / with stand (kg) 130 / 160 140 / 170 275 / 315 285 / 325 515 Jaw material – iron / steel / wolfram carbide GJN-HV600 (XCr14) / UNS J91109 / WC GJN-HV600 (XCr14) / UNS J91109 / WC GJN-HV600 (XCr14) / UNS J91109 GJN-HV600 (XCr14) / UNS J91109 GJN-HV600 (XCr14) / UNS J91109