Roll Crusher ,tooth Roll Crusher, Fine Crusher,hammer Crusher,jaw Crusher,

Application of rock crusher Laboratory rock crusher is  applied to mineral separation,chemical,cement,fireproofing material,grinding material,grinding material,building material and other industries,finely crushes various ores and rocks of which hardness is below high or medium hardness,other products are produced in the building material industry. Working principle of  rock crusher 1.Laboratory rock crusher consists of two extrusion rollers synchronously in phase , one is fixed roll and the pther is moving roll . 2. The materials are fed from the top of the two rollers and the extruded rollers are continuously carried into the middle of the rollers . Under the high pressure of 50-200Mpa ,the materials are discharged from the machine with the ideal particle size. 3.When the material touches the roll surface ,the roller force increases gradually , and the maximun pressure can reach 200 Mpa .In addition to a certain proportion of powdery materials , a large number of cracks exist in the interior of other granular materials ,which can greatly reduce the energy consumption of crushing grinding in the further grinding process. Features of rock crusher 1.The roller sleeve of this machine is made of our company 's patented material ,which is the advanced wear- resistant material in China .Continuous service life can reach more than one year .Small amount of maintenance , low cost ,which is no other domestic crusher comparable . 2.With compact structure,light weight and small volume ,the equipment of roller crusher can significantly save investment for the crushing powder grinding system with the same production capacity requirements. 3.Simple structure ,small space,convenient operation and maintenance. 4.Reasonable structure,low operation cost , stable operation ,high efficiency and energy saving ,high crushing efficiency and adjustable discharge particle size. 5.The interior is equipped with dustproof board with good sealing performance ,which avoids the splash of small materials after crushing ,with less dust and low working noise ,and greatly improves the working environment. 6.The machine is equipped with safety protective device.When unexpected metal iron parts enter the crushing cavity, the protective device moves and the iron parts leakout and the equipment runs normally. 7.The machine's abrasive roller body can be adjusted freely between 1mm and 20mm.After the crushing grain size is adjusted according to the requirements of crushing grain size,the crushing grain can be controlled reliably ,and all of it is discharged from the lower part of the crushing chamber with ideal grain size.