Solar Strut Channel Cold Roll Forming Machine With Servo Feeding Device & Press Punching Machine

Solar Strut Channel Cold Roll Forming Machine With Servo Feeding Device & Press Punching Machine Main Specifications of Solar Strut Channel Roll Former Decoiler / Uncoiler Decoiler Type Manual or Hydraulic or Auto Type Coil Width Max. 1250mm I.D 508-610mm Leveling Device 7 Rollers type leveling upper 3 rollers, lower 4 rollers Motor Power 3.0KW Servo Feeding Device Servo motor power 0.85KW Servo motor brand YASKAWA (Japan) To exact accurately feed the sheet into punching machine according to the set program Press Machine Device Punching Type Press machine type Punching Pressure According to customer's requirements Punching Mold Size According to drawing Punching Mould 1 set Main Power 7.5KW Main Roll Forming Part Forming material thickness 1.0-2.5mm Forming material type GI Forming motor about 22KW Drive type Chain drive Shaft material 40Cr high grade steel tempering treatment (HB220-260) Bearing  HRB bearing Roller material GCr15 steel, HRC 58-62 and roller surface with hard chrome 0.05mm Forming station about 24 stations Turkey head for adjust the finished profile before cutting Hydraulic Cutting & Hydraulic Station Cutting type Hydraulic post-cutting after roll forming Cutting blade material Cr12Mov, Quench treatment, HRC58-62 Hydraulic power 4.0KW Hydraulic pressure 15Mpa Cutting tolerance +/-1.5mm