Surface Sensor Calibrator - Surface Temperature Probe Calibration System

Introduction Surface Sensor Calibrator - Surface Temperature Probe Calibration System is mainly used to calibrate surface sensors of various sizes and types, such as thermistors, thin film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, etc.  Original source: ?id=139 DTZ-400 surface sensor calibrator is composed of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature. The temperature rises quickly, and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter, and has a communication interface that can communicate with a computer.  DTZ-400 surface probe calibrator can be used as a calibration source for thermal imaging cameras with slight changes. Function Large calibration plane: the calibration plane has a diameter of 130mm, and can calibrate various types of surface-mount temperature sensors Rapid temperature rise: from room temperature to 400 Celsius for 30min High stability: 0.3Celsius @300Celsius, 0.4Celsius@400Celsius Stabilization time: only 8min to stabilize High resolution: resolution is 0.01 Celsius Portable and reliable: the whole machine weighs only 3.5KG, easy to carry Multi-segment temperature control: Built-in multi-segment PID can realize segmented temperature control, small overshoot and overshoot, rapid temperature rise, and small temperature control fluctuation Communication function: RS-232 standard interface, can read and control the temperature of the calibration system ◆ Calibration temperature can reach 400 Celsius DTZ-400 surface sensor calibrator has a good temperature rise and fall speed, from room temperature to 400 Celsius, it takes 30 minutes, from 400 Celsius to room temperature, it takes 55 minutes, with rapid cooling device only 50 minutes, greatly improved work efficiency. ◆ The diameter of the calibration plane reaches 130 mm, which can meet the calibration needs of most surface temperature sensors DTZ-400 ssurface temperature calibration diameter reaches 130mm, enough to calibrate surface sensors of various sizes and types, such as thermistors, thin film sensors, surface resistance thermometers, ribbon sensors, surface-mount thermocouples, etc. ◆ External reference platinum resistance thermometer can be installed to reduce the uncertainty of calibration In order to achieve the ultimate calibration accuracy, the design engineer reserved a thermometer socket at the bottom of the aluminum surface. A platinum resistance thermometer with a diameter of 5mm can be inserted as a standard instrument for comparison and calibration, which greatly improves the calibration accuracy. ◆ Excellent temperature uniformity and surface finish of the calibration plane Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform surface temperature source. The DTZ-400 surface temperature calibration system uses aluminum material as the surface and has a high finish. It can ensure that the sensor being calibrated has good contact with the surface temperature calibrator, thereby reducing the calibration uncertainty. DTZ-400 uses special heating materials and constant temperature structure, the surface temperature is more uniform. ◆ Accurate and stable temperature control, small overshoot temperature The device provides a variety of parameter options for users to choose, including setting the PID parameters of three different temperature ranges of high, medium and low, the inflection point between different temperatures, alarm temperature and so on. ◆ Portable and easy to use The whole machine weighs only 3.5kg, compact and portable. Technical indicators Model  DTZ-400G surface sensor calibrator  DTZ-400BG surface sensor calibration DTZ-400BCG surface sensor calibration DTZ-450BG surface probe calibrator DTZ-460BG surface probe calibrator Temperature range 35 Celsius-400 Celsius 35 Celsius-400 Celsius 50 Celsius~400 Celsius 50 Celsius~500 Celsius 50 Celsius~500 Celsius product type Regular Applicable for L-type sensor Smart touch screen High temperature customization Calibration plane diameter 130mm Uniformity 0.4 Celsius@35~ 100 Celsius ,0.8 Celsius@100~300 Celsius,1.2 Celsius@300~400 Celsius Volatility(10min) 0.2 Celsius@35~ 100 Celsius，0.4 Celsius@100~300 Celsius，0.8 Celsius@300~400 Celsius Heating time Room temperature ~400 Celsius 30min Room temperature ~600 Celsius     50min Cooling time 400 Celsius~Room temperature       (Equipped with rapid cooling device takes only 50min） Stability time 8min Display resolution 0.01 Celsius Power supply 220VAC/50HZ/800W Communication Interface RS-232 Sensor type AA Level Pt100 Heating furnace size 280 (L)*270 (W) *190 (H)（mm） Controller size（mm） 218 (L) *175 (W) *145 (H) Weight 3.5kg Storage conditions Neɡədiv20 Celsius~60 Celsius （Neɡədiv4 ~140 Fahrenheit）      5%RH-80%RH(No condensation)