OTCL 500 Dual-function Brake Lathe Machine For Disc

OTCL500 DUAL-FUNCITIONS BRAKE DISC LATHE Main specifications Model OTCL500 Maximum Diameter Of Brake Disc 500mm Working Height Min/Max 780/1200mm Drive Speed 150RPM Motor Power 750W Motor 220V/50Hz 110V/60Hz Thickness Of Brake Disc 6-40mm Cutting Depth Per Knob 0.005-0.015mm Cutting Precision ≤0.00-0.003mm Brake Disc Surface Roughness Ra 1.5-2.0μm Gross Weight 128KG Dimension 910 × 510 × 310mm   Feature: 1. Basing on the actual axis of rotation, completely solve the problem of brake pedal dithering, brake disc rust, brake deviation and brake noise. 2. Eliminate the assembly error when disassembling and assembling the brake disc. 3. On the car repair without the need of disassembling the brake disc to save labor and time. 4. It is convenient for the technicians to compare the run-out tolerance before and after cutting brake disc. 5. Save cost, powerfully shorten the repair time, and reduce client’s complaint. 6. Cut the brake disc when replacing the brake pads, assure the brake effect, and prolong the service life of brake disc and brake pads. 7. Besides working on the car, OTCL500 can also work off-car. Any brake disc that is unable to approach by on-car lathe, can be taken out and then lathe on OTCL500. Only a few installation steps are new and OTCL500 can be changed between on-car and off-car. That is more flexible and labor-efficiemt. Dual-functions on one machine are definitely a money-marking tool for all customers.                         Standard Adapter No. Standard Accessories Qty 1 Universal Slide Mounting With Thread 1 2 Universal Slide Mounting Without Thread 1 3 Extension Brakets 1 4 Small Mounting Plate 1 5 Drive Adapter 1 6 Tool For Disc Lathe 1 7 Bit 2 8 Big Silencerbank For Discs 1 9 Small Silencerbank For Discs 2 10 Shims Wash 5 11 Shims Wash 1 12 S-Hook 1 13 Hexagon Key M6 1 14 Brush 1 15 Taper Cone 2 16 Clamp 4