Broad-Spectrum Non-Foaming Biocide /Algaecide(CAS NO.31512-74-0)

Application:  Swimming Pools,Spa,Hot Spring,Landscape Water,Aquarium;   Industrial Water System,Recirculing Cooling Towers;  Oil removal,Rust prevention,Sedimentation, Petroleum systems,Paper Industry;  Home Furnishing,Eye drops,Printing Ink; Food&Beverage Industry Cleaning  Metal working fluids ,Metal Hydride / Borohydride;  Disinfectant  Features:  Non-foaming, non-toxic, No chlorine odor, mild, Non-irritating, Non-corrosive  Cationic polymer bactericide, Biocide and clarify water quality  Effectively control and kill algae, remove harmful deposits,  Prevent filter clogging  Stable in hard water, stable in a wide range of PH and temperature,  Widely used, high cost performance  Good Stability , Long lasting Effection, Safe used. As a cutting fluid: accelerate the crushing of metal debris,  Accelerate the separation of water and oil in the cutting fluid,  Effectively reduce the growth of bacteria,  Extend the life cycle of the cutting fluid  Advantages as a civilian disinfectant Abstract: Recommended dosage for swimming pool, SPA, aquarium, etc. 1-100PPM Whether PSC80626 is mixed into common sterilization and disinfectant preparations, or used as a bactericidal and algaecide alone, it shows good stability and can effectively kill and clarify water. As the world's leading bactericidal and algaecide, PSC80626 has been authorized by the U.S. Environmental Protection Agency for its mild and non-irritating, especially environmentally friendly characteristics. The recommended amount of industrial circulating water is 20-200PPM  PSC80626 is currently recognized as the best and most advanced water treatment solution in the world. Cited in Busan 77 and WSCP by Buckman, PSC80626 has basically the same chromatographic data and efficacy. At the same time, it is feasible and effective to remove sediment, dirt and impurities. It is different from chlorine preparations, non-corrosive, easy to detect and add, reduce labor costs, and ensure the normal operation of industrial equipment. Food processing industry The dosage of PSC80626 is small, cost-effective, and very small dosage can achieve good results. The use and formula are simple, the stability is good, and the effect is long-lasting. It can be used for cleaning related containers and equipment of edible industrial production enterprises such as breweries, milk factories, and beverage factories.  Metal cutting fluid In actual production, even high-quality metal cutting fluids must be added with a certain amount of bactericidal and algae-removing agents to extend the service life and increase the utilization rate. PSC80626, whether used as a metal cutting fluid additive, a settling agent or a water-based cutting fluid, can accelerate the sedimentation of metal chips, accelerate the separation of water and oil in the cutting fluid, effectively reduce the growth of bacteria, and extend the life of the metal cutting fluid. PSC80626 is used in fully synthetic metal cutting fluids for water machines, and the amount is very small, and the additive formula can be adjusted flexibly. As a settling agent, it is basically consistent with Buckman's Busan 77 in terms of theoretical map test data, which can completely replace this type of product and has a significant effect in actual use. Civil disinfectant: households, public places, farms, warehouses, etc. The recommended dosage is 1000-1200PPM PSC80626 is a polyquaternary ammonium salt disinfectant and is already the sixth-generation product in the development of quaternary ammonium salts. Its main characteristics are less irritation, lower toxicity, and milder bactericidal effect. It is widely used in the antibacterial disinfection of contact lenses, eye drops, wet wipes and personal care products. After sterilization experiments, it is confirmed that the sterilization rate is as high as 99.9%. At present, in addition to disinfection of skin and mucous membranes in hospitals, disinfection of surgical hand washing and disinfection of medical instruments, it is also widely used in the disinfection of equipment and utensils in various public places and various production appliances, as well as the anti-mold of industrial products and agricultural crops, and the disinfection of livestock buildings. Sanitation and disinfection, aquaculture, plastic antibacterial preparation, etc.