Quick Details
- Processing Time:About twenty days
- Port:Main ports of China
- Supply Ability: 60 Tons Per Year
- Brand Name:Firsta
Metallized and coated matte PET film Coated PET Film
PET Release Liner Manufacturers
Coated Matte PET Film Specifications:
Thickness(micron)
Width(mm)
Core ID(inch)
19~50μm
500~2000
3”or 6”
The specifications can be adjusted according to the customers’ requirements.
Typical Values:
Property
Unit
Typical value
Testing Method
Thickness
mm
45
DIN 53370
Tensile Strength（MD/TD）
MPa
170/201
ASTM D 882
Elongation at brea（MD/TD）
%
170/102
ASTM D 882
Heat shrinkage（MD/TD）150℃,30min
%
0.8/0.2
ASTM D 1204
Haze
%
95.0
ASTM D 1003
Gloss（45°）
%
30
ASTM D 2457
The above values of the properties obtained in our laboratory test. These values are for
informative purpose and not in guarantee or warranty in any specific condition. Users are advised to conduct their own testing to determine product suitability to use.Firsta Matt PET Film Main
characteristics:1. High haze, low light transmittance.2.
Low gloss on the surface.3. The top-coating side of this product has superior printing ink adhesion for UV ink printing and bar code
printing on labels, which will not fade away over time like the corona-treated side does.Matt PET Film Application:It
is used as face stock of non-transparent self-adhesive label, such as electronic products.
