Single-Stage Vacuum Insulation Oil Purifier-VF

SINGLE-STAGE VACUUM TRANSFORMER OIL PURIFIER   NSH-VF VF series single-stage vacuum insulation oil purifier is mainly used to extend the lifetime of oils used in transformers, circuit breakers, mutual inductor, voltage regulators and switch gear, or to inject the insulating oil into the transformers. Application VF series single-stage vacuum insulation oil purifier is mainly used to extend the lifetime of oils used in transformers, circuit breakers, mutual inductor, voltage regulators and switch gear, or to inject the insulating oil into the transformers. Equipped with regenerators, it can improve the effect of de-acid, de-color and remove dielectric and acid more effectively. The value of breakdown voltage will increase from 15KV to 65KV. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration. Features 1. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly. 2. Enhance the value of breakdown voltage greatly. 3. Easy handling and maintenance. 4. Inject oil into the transformers 5. Online work. 6. Lower maintenance and replacement expenses 7. High efficiency and effectiveness 8. Available in mobile or stationary options. 9. Small size, light weight, low noise. 10. Various sizes and configurations (alloy shield) available. Parameter Value VFD-10 VFD-20 VFD-30 VFD-50 VFD-100 Capacity, liters/hour 600 1200 1800 3000 6000 Heating Power, kW 9 15 24 36 60 Total Power, kW 11 17 26 39 65 Power supply Fully Customizable Inlet Diameter, mm 25 25 25 32 40 Outlet Diameter, mm 25 25 25 32 40 Dimensions(without trailer) length, mm 1300 1400 1400 1400 1550 width, mm 900 900 900 900 1550 height, mm 1300 1300 1300 1700 1850 Weight(without trailer), kg 300 330 350 400 650 Processed Oil Spec Water Content, ppm ≤7 Dielectric Strength, Kv ≥60 Filtration Fineness, um ≤5( or 1-5 as needed ) Gas Content, % ≤0.1