Quick Details
- Feeding size:less than 10 mm
- Capacity:2-20 t/h
- Power:1.5-5.5 kw
- Processing Time:10-25 business days
- Port:Xiamen
- Supply Ability: -
- Brand Name:-
Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional
Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed
layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size
recovery and large save of make-up water for under size fraction. In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%,
W:5.5%, Pb:1.63%, Zn:2.04%.
Advantages and Characteristics:
1 High capacity.
2 High concentration ratio and high recovery.
3 Easy to install, operate and maintain.
4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling.
5 Saving water 30-40% than ordinary jig.
6 The pulsation speed very easy adjusted by regulator.
7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium,manganese, barite, zirconium, chrome and gemstone etc.
Model
Hutch area(㎡
Stroke(mm)
Frequency of stroke
(r/min)
Input Size
(mm)
Makeup water
(m³/h)
Capacity
(t/h)
Power
(kw)
Dimensions(mm)
LZJT1-1
0.74
15-25
80-120
<5
1-2
2-3
1.5
2170/1110/1890
LZJT2-2
2.28
12-17
60-200
<5
1-2
7.5-15
3
2560/1450/2250
LZJT3-1
3.3
12-30
80-100
<5
1-2
10-15
5.5
3145/1820/2330
LZJT4-2
4
6.5-26
80-150
<8
1-2
12-16
3.0
3540/1990/2550
LZJT5-2
5
15-25
80-110
<8
1-2
10-20
5.5
3650/2120/2610
