1GE PORT FTTH XPON ONU

Model Number:STR5001X Type:FTTx Solutions Use:FTTH PON Interface:1 GPON BOB (Class B+/Class C+) Operating Temperature:0℃~+50℃ LAN Interface:1x 10/100/1000Mbps auto adaptive Ethernet interface Wavelength:TX: 1310nm, RX: 1490nm Optical Interface:SC/UPC Connector Power Supply:DC 12V/0.5A Power Consumption:<3W Transmission distance:20KM Receiving sensitivity:≤-27dBm/≤-29dBm Warranty:1 Year Description 1.  Overview ● STR5001X is designed as HGU (Home Gateway Unit) in deferent FTTH solutions,The carrier-class FTTH application provides data service access. ● STR5001X is based on mature and stable, cost-effective XPON technology. Itcan switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● STR5001X adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X 2. Functional Feature ● Support EPON/GPON mode and switch mode automatically ● Support ONU auto-discovery/Link detection/remote upgrade of software ● Support Route PPPoE/IPoE/Static IP and Bridge mode ● Support IPv4/IPv6 Dual mode ● Support Firewall function and IGMP multicast feature ● Support LAN IP and DHCP Server configuration ● Support Port Forwarding and Loop-Detect ● Support TR069 Remote Configuration and maintenance ● Specialized design for system breakdown prevention to maintain stable system  3.Application ● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Business：INTERNET、IPTV etc Specifications Hardware Specification Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power:+0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Chip Spec RTL9601D ,CPU 300MHz,DDR2 32MB Flash SPI Nor Flash 16MB LAN Interface 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector LED 4 LED, For Status of PWR、LOS、PON、LINK/ACT Push-Button 2,For Function of Power on/off,Reset Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply DC 12V/0.5A Power Consumption <3W Dimension 120mmx78mmx30mm(L×W×H) Net Weight 0.13Kg Panel lights Introduction Pilot Status Description PWR On The device is powered up. Off The device is powered down. PON On The device has registered to the PON system. Blink The device is registering the PON system. Off The device registration is incorrect. LOS Blink The device doses not receive optical signals. Off The device has received optical signal. LINK/ACT On Port is connected properly (LINK). Blink Port is sending or/and receiving data (ACT). Off Port connection exception or not connected.