Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
Top grade unique reed switch magnets/alnico magnets
ndfeb neodymium permanent magnet, ring shaped magnet
1) Strong magnetic force
2) High intrinsic coercive force
Feature of reed switch magnets/alnico magnets:
1) Material: Sintered/bonded Neodymium-Iron-Boron;
2) Grade:N33-N52,33M-48M,33H-48H,30SH-45SH,30UH-38UH and 30EH-35EH;29AH-34AH,28/30TH
3) Shape: ring,block,disc,bar and so on;
4) Size: according to customers' request;
5) Coating: Expoxy Resin Ni
6) Application: sensors,motors, rotors, wind turbines,wind generators, loudspeakers,magnetic holder, filters automobiles and so on.
The table below compares the magnetic performance of neodymium magnets with other types of permanent magnets.
Magnet
Mr (T)
Hci (kA/m)
BHmax (kJ/m3)
TC (°C)
Nd2Fe14B (sintered)
1.0–1.4
750–2000
200–440
310–400
Nd2Fe14B (bonded)
0.6–0.7
600–1200
60–100
310–400
SmCo5 (sintered)
0.8–1.1
600–2000
120–200
720
Sm(Co, Fe, Cu, Zr)7 (sintered)
0.9–1.15
450–1300
150–240
800
Alnico (sintered)
0.6–1.4
275
10–88
700–860
Sr-ferrite (sintered)
0.2–0.4
100–300
10–40
450
Physical and mechanical properties
Comparison of physical properties of sintered neodymium and Sm-Co magnets
Property
Neodymium
Sm-Co
Remanence (T)
1–1.3
0.82–1.16
Coercivity (MA/m)
0.875–1.99
0.493–1.59
Permeability
1.05
1.05
Temperature coefficient of remanence (%/K)
–0.12
–0.03
Temperature coefficient of coercivity (%/K)
–0.55..–0.65
–0.15..–0.30
Curie temperature (°C)
320
800
Density (g/cm3)
7.3–7.5
8.2–8.4
CTE, magnetizing direction (1/K)
5.2×10–6
5.2×10–6
CTE, normal to magnetizing direction (1/K)
–0.8×10–6
11×10–6
Flexural strength (N/mm2)
250
150
Compressive strength (N/mm2)
1100
800
Tensile strength (N/mm2)
75
35
Vickers hardness (HV)
550–650
500–550
Electrical resistivity (Ω·cm)
(110–170)×10–6
86×10–6
PHYSICAL PROPERTIES OF SINTERED NdFeB
Temp.Coeff.of Br
-0.09~-0.11%/?
Specific Heat
0.12Kcal/(kg,?)
Density
7.4-7.6g/cm3
Young’s Modulus
1.6x1011N/m2
Vickers hardness
600Hv
Poisson’s Ratio
0.24
Tensile Strength
8.0Kg/mm2
Curie Temperature
310~340?
Temp.Coeff.of Hc
-0.50~-0.60%/?
Thermal Conductivity
7.7Kcal/(m.h.?)
Electrical Resistivity
114μΩ.cm
Rigidity
0.64N/m2
Flexural Strength
25Kg/mm
Compressibility
9.8x10-12m2/N
Coeff. Of Thermal Expansion
4x10-6/?
Relative recoil permeabilityμrev
1.05
Introduction of reed switch magnets/alnico magnets:
1,Metal injection molding, made from the stainless steel, tungsten, Iron-base alloy, tool steel, hard metal alloy.
2,Rare earth magnet, including sintered Neodymium-Iron-Boron, bonded Neodymium-Iron-Boron, sintered Samarium-Cobalt. All magnets are supplied in a wide range of shapes such as:
rectangular blocks, discs, rings and segments.
3,Ferrite magnet: Hard ferrite magnet and soft ferrite magnet including the MnZn and NiZn.
4,Die-cast component, made from zinc, aluminum, magnesium alloys.
Picture of reed switch magnets/alnico magnets:
Other quality management
SPC dada statistics., Advanced inspection equipments, Staff education, APQP FMEA , PPAP , SPC , MSA , 6 sigma , MIL-STD M105E Standard Ac=0 Sampling Method ( Zero Defect Plan ) ,
Traceable lot number naming method .
♣ Please do not hesitate to contact us with the following infomation if you have intention of purchasing,thanks
1.Drawings or samples (offering both will be preferred).
2.Purchasing quantity.
3.Materials and other requirements.
Certification:
reed switch magnets/alnico magnets