SPM(Single Point Mooring Rope) applies round double braided construction as a new design for better performance in higher strength,better abrasional resistanc and longer service span compared
with traditional fiber ropes and wire ropes.
The SPM is spliced with galvanized thimbles at both ends and is covered with polyester coat around the ends that are not less than 6mm.Elastomer is also used to enchance the anti-chafe
level.Hawser should be fitted with tubular floats commencing from chafe protection fo one end and ends at 25ft from the thimble of other end.
◎ Material:
Polyamide (nylon 66).
◎ Construction:
load-bearing cores with a protective
cover of
polyamide.
◎ Application:
Marine fishing.
◎ Colour of Rope:
White with green marker.
◎ Approx. Spec.
Density 1.14 non floating.
◎ Melting Point:
215℃.
◎ Abrasion
Resistance: Excellent.
◎ U.V.resistance:
Excellent
◎ Temperature
resistance: 80℃ max continuous.
◎ Chemical
resistance: Reasonable; acids, oxidisers &
solvents will affect
nylon.
◎ Dry & wet
conditions: Wet strength ± 5% lower than
dry
strength.
◎ SPM Polyamide
Hawsers are manufactured in accordance
with OCIMF 2000
regulations.
◎ Weight : ±5%
Tolerance.