Quick Details
- Processing Time:3-5
- Port:Shenzhen
- Supply Ability: -
- Brand Name:-
Mode switch:
1.Press and hold the metal ring on the edge of the black sensor for 6 seconds(do not touch the black sensor). The blue light is always on, the administrator verification starts.
2. Input the administrator's fingerprint(any fingerprint can be passed in case of no administrator status). Then the blue light flickers for 3 times, the mode
switch starts:
a.If the pink light flickers once, the buzzer beeps once, it indicates that the working mode has been switched to the sharing mode.
b.If the pink light flickers twice, the buzzer beeps twice, it indicates that the working mode has been switched to the opening mode.
Add administrator fingerprints (you can add fingerprint one by one)
1．Press and hold the metal ring on the edge of the black sensor for 3 seconds(do not touch the black sensor). The blue light flickers, then lift your finger. Then
the blue light is always on and the administrator verification starts.
2．Input the administrator's fingerprint (in the initial state, any fingerprint can be the administrator's fingerprint), and the blue light flickers, then new
fingerprint could be input;
3．If the fingerprint is input correctly, the buzzer will beep once (at least 8 times of fingerprint input)
a.When the pink light flickers 5 times, the buzzer will "beep"for a period, indicating the successful type-in of the fingerprint.
b.When the red light flickers 3 times and the buzzer beeps 3 times, indicating that the administrator's fingerprint is wrong and should be re-input.
c.The red light is on and the buzzer beeps twice, which indicates that the administrator users reach the upper limit.
4．It will exit automatically after 10 seconds without operation
