G100 Supper Concrete Power Float Machine

G100 Supper Concrete Power Float Machine is a new type of concrete power float machine developed by HIKING Company. The machine is driven by a 15 horsepower high-power engine and equipped with a high-performance reducer, which makes the blade speed reach an astonishing 160R/Min, and the efficiency is more than five times that of the ordinary polisher. The machine is equipped with a blade adjusting rod, which can easily adjust the blade angle. Providing two modes of electric starting and manual starting makes the operation more convenient, simple and labor-saving. The G100 Supper Power Float Machine is widely used in pulping, smoothing and polishing the concrete surface of high-standard factory buildings, warehouses, parking lots, squares, airports and framed buildings. Cement trowel machine is also called cement photoelectric receiver. Its main structure is a spatula rotor driven by a gasoline engine. There are four spatulas on the bottom of the cross in the middle of the rotor. The inclined direction of the spatula is the same as the rotation direction of the rotor. The triangular belt is driven by the gasoline engine to rotate the spatula rotor. When operating, the worker should first grasp the control handle, start the gasoline engine,and then the spatula will rotate to polish the cement floor. Horizontal design is adopted to make the center of gravity of the machine lower and make this machine more stable than other types of car-mounted trowel machine. At the same time, we use our self-made high-performance reducer to ensure its lifespan and make the machine have a higher speed.