Weight Indicator

This is a microcontroller based Indicator unit. It is highly versatile, Accurate and different from the Conventional indicators. It displays Analog signal (mV) Input from the Loadcell into engineering values. With the Help of the keypad and Display, unit allows to set & modify Various configuration parameters & calibration. Display 6 Digits, 7 segments RED LED, 0.56” height Keyboard 4 Keys (Index, Up arrow, side arrow, Esc) Membrane Decimal Point Selectable: 00000.0, 0000.00, 000.000 (XXXXX.X, XXXX.XX, XXX.XXX) Programmable parameters Capacity, Display Resolution, Grad, Zero Track Band, Zero Range EEPROM/Flash Memory Configuration Data are stored in serial EEPROM/Flash RAM and Battery backup not required Analog to Digital Converter Type 24–bit, (Delta-Sigma with integrated analogue and digital filter) Conversion Rate 15 measurement values per sec Resolution Internal up to 16 million counts; display up to 10,000 counts SCALE CALIBRATION AND FUNCTIONS Calibration Calibration with weight Digital filter Step width : 0,1,2,5 Round OFF : 1,2,5  Moving Average : 0 to 30 Weighing functions Tare, zero, auto zero tracking, auto-zero at power-up, auto-net at power-up Linearity Within 0.01 % F.S. Load cells Excitation 5 V DC at 58...1 200 Ω, max. 100 mA Number of load cells Up to 8 load cells (350 Ω) or 18 load cells (1 100 Ω) in parallel Connection 4-wire technology Power Supply 12...28 V DC, max. 300 mA / 110-230VAC (Factory configured) ENVIRONMENT AND ENCLOSURE Operation Temperature & humidity -10 °C to +50 °C; 85% RH max, non-condensing Housing & Protection Panel mount, Aluminum Extruded, SS Front & Back Dimensions & Weight 48 x 96 x 110 mm (W x H x D), 0.5 kg Cut-out 92 mm (W) x 44 mm (H) Serial Interface One Port Factory configured for communication with remote display/Printer/Computer using RS-485/RS-232C (Factory configured) Baud rate 1200 to 115 200 baud Digital Input Two digital inputs, Islated Remote input for GROSS/NET, TARE and Zero functions programmable Output UP to 2 relays output (Batching or Alarm selectable) Contact rating: Transistor Outputs: 2 (Open Collector: 24 V DC, max. 100 mA), (Isolated) ANALOG OUTPUT 4-20 mA, 0-20 mA, 0-10 V or 0-5 V, 16 bit (Isolated)