Quick Details
- Processing Time:3-4 days
- Port:Europe port
- Supply Ability: 10000 Metric Tons Per Month
- Brand Name:high density polyethylene hdpe granules
HDPE is a white powder or granular product. Non-toxic, tasteless, crystallinity was 80% ~ 90%, softening point is 125 l ~ 35
℃, using temperature is 100 ℃; Hardness, tensile strength and creep are better than low density polyethylene. Good wear resistance, electrical insulation, toughness and cold resistance; Good
chemical stability, at room temperature, insoluble in any organic solvents, acid, alkali and various kinds of salt corrosion resistance; The film has little permeability to water vapor and air
and low water absorption. Aging resistance, environmental stress cracking resistance is better than low density polyethylene, especially hot oxidation will make its performance degradation, so
must be added in the resin antioxidant and uv absorber, etc to improve the deficiency of. The heat deformation temperature of high density polyethylene film is low under stress.
Specifications
Item
Test condition
Test Method
Value
Unit
Density
ISO 1183
0.944-0.955
g/cm3
MFR
190°C/2.16kg
ISO 1133
0.03-0.07
g/10min
Tensile strength at yield
ISO 527-2
22
MPa
Elongation at break
ISO 527-2
>350
%
ESCR
F50,50°C,100%
ASTM D-1693A
1000
h
VICAT
ASTM D-1525
126
°C