Customization Hydraulic Crawler Mini Excavator For Municipal Engineering

Customization Hydraulic Crawler Mini Excavator For Municipal Engineering Wholesale Hydraulic Crawler 0.8T Mini Excavator Mini Digger Excavator Quick Detail: 1. The boom and the bulldozer oil cylinder are equipped with high-strength cast steel protective plates; 2. Dig-to-blade and dozer float features are easy to clean up; 3. Strong lift and dig performance helps you to get the job done faster; 4. Auger, grab, hydraulic hammer, narrow bucket can be installed. Specifications: Performance Parameter Rated Power 7kw-7.5kw Bucket Capacity 0.025m³ Bucket Width 300mm Engine Model Koop192f Optional Engine Briggs&Stratton Operating Weight 800kg Pump Form Single Gear Pump Set Working Pressure 14Mpa Swing Speed 12rpm Travel Speed 2.2Km/h Gradeability 30° Ground Pressure 19Kpa Max. Digging Force 7.5Kn Dimensions Total Width 720-780mm Total Height 1300mm Total Length 2430mm Min.Ground Clearance 80mm Track Ground Length 1140mm Track Width 150mm Working Range Max.Digging Distance 2450mm Max.Digging Depth 1200mm Max.Digging Height 2350mm Max.Dumping Height 1600mm Min.Swing Radius 1100mm Max.upgrade Height of Bulldozer Blade 120mm Max.Digging Depth of Bulldozer Blade 200mm Notices: 1. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car. 2. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground. 3. Before the operator can leave the cab, the bucket must be dropped and the engine turned off. 4. Do not lift materials with buckets. 5. When abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting. 6. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope. 7. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure. 8. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping. Applications: The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals and dredging rivers, in quarries, open-pit mining and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded. Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming and pile pulling.   Our Service: We support OEM/ODM service, we have professional develop research department, like designs, colors, and also products all can be acceptable customized, we have 3 times supervise on quality control through production line before send out. And quality and service is our first principle of company.We keep 12 months warranty, beyond the warranty period, all spare parts offered to you with our cost price (not including freight).By the way, we support 24Hour customer service by email or phone. Please feel free to contact, we are willing to become your friend and business partner. Company Brief Introduction: Mini Excavator, Full Energy, You will become a Big Winner! Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, Scissor elevator, forklift and electric forklift together with other machinery fields. Through these products, our Mini Excavators sell pretty hot! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customer’s good likes! And Also Scissor elevator, like 6 meter, 10 meter, 12 meter really hot as well. All Products have obtained ISO9001, CE, SGS, EPA and TUV Certificated. Our Company: Mini Excavator, Full Energy, You will become a Big Winner! Qingdao Fullwin Machinery Co., Ltd. is established in 2012, which is a professional dedicated Manufacture of Construction machinery and building equipment, which is affiliated with Hong Kong Hope LLC. Our Headquartered located at Hong Kong, the Export department is located at Qingdao city Shandong Province. The factory is located in Jining city Shandong Province, Until 2022, where we have 9876 square meters, and over 2000 professional experienced l workers here. Our business scope has from Mini Excavator manufacturing from China to Global Agent now. Welcome to Join us as Agent!! Team profile: Fudewang Machinery Co., Ltd. has a production team consisting of highly educated and high-quality talents that integrates factory and foreign trade. Its leader, Mr. Shen, has 30 years of experience in foreign trade, and was once the first enterprise in Qingdao's foreign trade export volume. As one of the first teams to contact with the export of building materials in China, it witnessed the rapid rise and development of construction machinery and engineering machinery, accumulated rich experience in excavator export and production skills, and became a scientific and efficient management system. The team members are young and full of vitality, innovative and brave to meet challenges. With a good sense of social responsibility, he is willing to contribute to improving the status quo of China's machinery technology and safety. Looking ahead: With the successful experience of other industries, we pay more attention to service and bring consumers a winning championship experience.