Strong Traffic Safety Barrier Highway Guardrail

Product description: Guard Rail is widely used for the highway safety and fixed on the sides of highway, especially on curves and slopes for preventing vehicles riding out of roads. This system is used for surface car park delineation,infrastructure protection and approach lane containment where there is a risk to the motorist.  This system uses the same barrier rail as the Edge Protection System mounted on either base plate mounted rubber cushion posts or rigid RSJ posts.    Sub-surface mounted RSJ or low cost sacrificial “Z” posts are also available if required and post centres can be extended to 3200mm.  Additional rigidity can be provided at specific points by reducing the rail post centres at these points to 1600mm or 800mm subject to site conditions.     Corrugated Sine Wave Crash Beam is available in both straight and curved sections with standard 90° internal and external angles for continuity of protection.  Other angles are available on request Crash Barrier Beams are available in 3.5m lengths giving an effective length of 3.2m.  The corrugated beam section has a thickness of 3mm with physical properties as per the table below. The RSJ type posts are available in bolt down and grout in form at different heights and can be installed at different post centres to suit site conditions (1.6m/3.2m).   Standard panels include 50mm x 50mm mesh and perforated, although any design to suit architectural requirements can be considered. In addition to the combined safety rails and pedestrian guard panel, Avon Barrier manufacture standalone pedestrian guard rails with either sub-surface or baseplate mounting. Normal Sizes L:3200/3810/4000/4300/4320× W:306/310/312/380XHeight : 80/82/83/85×  Thickness :2.75/3/4mm. Available in different sizes. Material Q235,Q345 Porfile W-beam, Three-beam. Surface Treatment Hot dipped galvanized or plastic sprayed coating Applicabele Standards JT/T2811995(Corrugated Sheet Steel Beams For Expressway Guardrail - China), AASHTO M180(Corrugated Sheet Steel Beams For Highway Guardrail - USA), RAL RG620 (German) or any other International Standards. Base Steel Grade Q235B (equivalent to S235JR according to DIN EN 10025 and Gr. Daccording to ASTM A283M) or Q345 (S355JR / ASTM A529M 1994). The Thickness of Galvanized (Double Sides): 550g/m2 (40µ) or 1100 g/m2 (80µ) or 1200 g/m2 (85µ) or as per your request. Features Great corrosion resistant, high intensity, long and durable, with good impact resistance, low cost, long life, higher security,environmental protection, etc. Relevant Parts Required for Guardrails: Post, Spacer (C, U and Sigma types etc) and Fasteners, Bolts&Nuts,Terminal,Reflectors MOQ one 20 feet container Price Terms FOB,CFR,CIF Payment Terms T/T,L/C at sight Other special specification as per client's requirement or drawings   Key Features Impact Tested Bolt Down /Grout in post system Varying Post Centres and Beam Heights Hot Dip Galvanised BS729 Benefits Confidence in proven protection Ease of installation Application Flexibility Strength and Durability Technical Specification Edge Protection: The system incorporates 310 x 85 x 3 mm sine wave untensioned crash rail mounted on either sub-surface or base plate mounted 127 x 76 x 13 mm RSJ Posts set at 1600mm centres. Enhanced strengthening is provided by reducing the post centres to 800mm Safety Crash Barrier: 3.5m lengths (effective length 3.2m) Corrugated beam section 3mm thick The RSJ type posts are available in bolt down and grout in from at different heights and can be installed at different post centres to suit site (1.6/3.2m). Enhanced strengthening is provided by reducing the post centres to 800mm Options Available Alternative Fixing for reinforced car park decks Infills for Pedestrian Protection Various Designs Corporate Paint Finishes for Pedestrian Protection Fish Tail Ends   Our Services: 1. Reply your enquiry in 24 working hours; 2. Experienced staffs will answer all your questions in professional and fluent English; 3. Customized design is available. 4. Exclusive & unique solution can be provided by our well-trained and professional engineers; 5. If you have a large number of orders, we will send you 1 ~ 2 parts to prevent damage in transit; 6. We will try our best to meet your requirements and supply you best quality of the products. Q&A： 1,Q: Can you offer free sample? A:Yes, but usually the customer need to pay the freight. 2,Q: Are you a manufacturer? A: Yes, we have been in providing the professional products in cage field for 11 years. 3,Q: What information should I provide, if I want a lowest quotation? A: The specification of the cage. 4,Q:Can I customize the products? A:Yes, as long as provide specifications, drawings, can only do what you want products. 5,Q: how about the delivery time? A:Usually within 15- 20days,customized order may need longer time. 6,Q: How about the payment terms? A:T/T ( with 30% deposit ) , L/C at sight. Western Union. 7,Q: :How long can the dog cage last? A:The product under normal use for a period of three years from the date of retail purchase. 8,Q:What is your after-sales service? A:We offer professional advertising pics and spare hardware on free.  Why choose us： 1. Eco-friendly raw material   2. Factory directly, since 2011 3. Convenient transportation: Close to the seaport 4. Production capacity: we are capable to supply 40 Containers monthly 5. We are a factory. We have advantages in price. OEM are welcomed. 6. We use good and environmentally friendly material, our products are safe for pets. 7. Timely communication with clients. 8. Good after sale service. 9. Good credit and fast delivery.   Introduction of our company: Hejian Perfect Metal Products Co., Ltd founded in 2016, but build factory in 2006. Our 91% products export to all over the world. We are a manufacturer specialized in producing metal wire kennels and metal wire mesh fence. It has punching machine, cutting machine, welding machine. These machines can produce many kind of fences. Also we have our own workshop to make the surface finish. We also have glassware products territory, glass cups, glass mugs, glass cruets, Being involved in producing borosilicate glasswares for more than 15 years,we have rich experience in hand blowning all kinds borosilicate glasswares with sophicated handicrafts.  Our main market is America, Australia, Canada, Japan, Europe, South Africa, etc. And we are appreciate for all of them! Why choose us? - Our products provide good corrosion-resistance, anti-aging property, acid and alkali resistance, no color fading, smooth and neat surface and comfortable touch. We have export experience more than 15 years, you can get professional suggestions for your property and high quality products. Our goal is high quality and superior service. Why not try & taste our service and high quality products by US? --Expert for wire mesh fence and glassware products in China.