Block Hydraulic Cylinders With Stroke 40mm

Block Hydraulic Cylinders With Stroke 40mm Main Parameters Maximum Bore Diameter 80mm Maximum Stroke 40mm Nominal Pressure 21Mpa Application Metallurgy The Block Cylinder design allows for a wide range of applications such as clamping, pressing, alignment and stamping. Mounting holes are another advantage, allowing quick and easy mounting in horizontal or vertical positions. 1. High clamping forces due to relatively small clamping elements2. repeatable and consistent clamping force for a given part size variation3. remote operation of many clamping elements for increased productivity The hydraulic cylinders manufactured by EOOE are compact in design and easy to mount horizontally or vertically on a flat surface. These hydraulic cylinder blocks are ideally suited to stamping, punching and assembly operations and can provide very high forces. Hydraulic blocks are available in a wide range of sizes, with a variety of mounting and fluid supply options.   Block Hydraulic Cylinder The Block Cylinder is a key step in improving the quality of your car engine. This new design has oil channels that are essential for the proper functioning of the engine. This allows the Block Cylinder to have the same internal dimensions as a conventional cylinder. It also improves the efficiency of the engine as it can be easily repaired if it develops a leak. The upper surface of the Block Hydraulic Cylinder is supported by the cylinder head. In addition to the cylinder head, there are ports, oil passages and water jackets. These provide lubrication and cooling for the engine. Some cylinder blocks also have provisions for mounting camshafts. l-head engine blocks contain openings for valves and crankshafts. These parts are connected by valve guides or bolts. The design of the Block Cylinder is innovative and it has many advantages.1. It is easy to manufacture. With the introduction of the Block Cylinder, it is possible to use any type of cylinder without any modifications.2. The cylinder is made of durable metal. The introduction of this new design has had a major impact on the durability of diesel engines.3. it helps to reduce fuel consumption.4. The engine will be more fuel efficient and will not require refuelling. The EOOE Block Hydraulic Cylinder has the following features.1. The sleeve flange extends upwards from the top mating surface.2. For cylinders of 100 to 150 mm, the downward extending sleeve flange is in contact with the machined face of the crankcase.3. The cylinder is also supported by a lower end of the crankcase with a flange.4. It has a device for placing the camshaft. EOOE Hydraulic is a world leader in the field of large diameter custom hydraulic cylinders. Rely on our experience in cylinder design, engineering and manufacturing to support your organization's critical fluid power applications. For innovative, cutting-edge designs for your custom cylinder applications, contact EOOE Hydraulic today!