Heavy Duty Dual Head Tire Pressure Gauge Truck Pencil Tire Gauge

Heavy Duty Dual Head Tire Pressure Gauge Truck Pencil Tire Gauge PRODUCT DESCRIPTION Product Description Heavy Duty Dual Head Tire Pressure Gauge LG27 Truck Pencil Tire Gauge are an essential tool that's used for checking tire pressure. Once you find the gauge type that you like best, try to use it at least once a month to ensure proper inflation as part of your regular vehicle maintenance. Driving on properly inflated tires improves the safety, handling, and fuel economy of your vehicle. You can check your tire pressure with one from Longwei: Part No Head Body Bar Cailbrate  LG27  Metal  Metal  2 side steel  10-160lb/in² 1-11KG/cm² If you're ballasting your tires, regular monitoring of your tire pressure is essential. Make checking your air pressure a whole lot faster with Longwei Dual Head Tire Pressure Gauge LG27 Heavy Duty Pen Tire Gauge Range 10-150PSI. It was designed specifically for ballast tires, and easily clips onto a pocket, so you'll always know where it is. Make sure your tires are up to snuff with the Air/Water Pencil Tire Gauge! Use the pressure recommended by your vehicle's manufacturer, pls do not exceed the "max pressure" figure found on the tire sidewall. Check pressure when tires are cold and have sat for at least one hour. Removing cap from inflation valve,place the gauge chuck firmly onto tire valve stem and press down evenly. If air escapes, apply more pressure until air stops escaping. Remove gauge from valve stem to read tire pressure. If tire pressure is too high, refit the tire pressure gauge to valve stem then gently press pressure release button until recommended pressure is reached. If tire pressure is low, inflate to the recommended pressure then recheck. Store tire pressure gauge in a safe, dust free area.