Orientek Fusion Splicer T45

Machine language:  English. French. Portuguese. Spanish Alignment method  Precise core alignment and cladding alignment Applicable fibers Any common optical fibers.rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657 Optical fiber diameter  Cladding:80~150mm,coatinglayer:0.1~3mm Cuttling length  5-16mm (coated optical fiber diameter≤250μm); 10mm(coated optical fiberdiameter:0.25~3mm) Fusion splicing consumption (typical value) 0.02dB(SMF);0.01dB(MMF);0.04dB(DSF);0.04dB(NZDSF) Retum loss  Better than 60dB Fusion splicing time(typical value ) 7s Heating time(typical value)  18s Pulling force test  1.96~2.25N Thermal shrinkagetube 60mm,40mm and a series of thermal shrinkage tubes Graphical display  High-performance 4.3 inch lcd Magnification time  320 times/88 times Fusion splicing record  10000 groups Battery capacity  11.1V,6800mAh,typical value offusion splicing and thermal cycle is 330 times Battery servicelife  Cycle charging times reach 300-500,can be replaced by customers Electrode servicelife  Typical value is 4000 times,can be replaced by customers Construction lighting  Built-in lights with high-brightness and wide lighting area Working environment  Temp:-10~50℃;hum:0~95%RH,height above sealeve1:0~6000m Operation interfaces  GUI graphical operation interfaces Extemal power AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v Extemal port  USB/SD Dimensions 120mm(W)×130mm(H)×154mm(D),(without rubber anti-vibration pad)        Weight  1.59kg(host engine).0.37kg(battery)