Efficiency 97% Silage Machine Hydraulic Motor Pump System Easy To Disassemble

Silage machine hydraulic motor pump system Easy to disassemble · Cast iron housing · Efficiency 97% · Hydraulic components · Power components of hydraulic systems · Higher efficiency · Model LPV50+LMF50 · Simple layout · System Solutions · Application silage machine · Work fast · Fully replace imported products · Patent certificate certification · 1 year warranty Silage machine hydraulic motor pump system depict: Silage machine hydraulic motor pump system from Highland of China, we can provide silage machine hydraulic motor pump system with high quality, high-performance parameters. Pump is the variable one that is with Charge Pump, and the motor the quantitative, or variable one with valve assembly. The control way of variable displacement pump and motor can be manual or hydraulic operated, and can simply control speed, direction and power of the output shaft of hydraulic motor. Silage machine hydraulic motor pump system user shall ensure that the hydraulic pump uses the correct formulation of the medium to ensure the cleanliness of the operating medium of the equipment, and shall not contain solid particles. (Self-cleaning filters are recommended) and use this pump/motor wisely! Silage machine hydraulic motor pump system specifications: LPV Series Technical parameter LPV hydraulic pump and LMF hydraulic motor series 30 50 70 90 110 130 Displacement Max displacement ml/r 30 50 70 90 110 130 Speed Max continuous working speed (Full load condition) r/min 3500 3500 3200 3200 2900 2900 Rated speed r/min 2500 Min continuous working speed r/min 500 Pressure Rated working pressure Mpa 35 Max working pressure (transient) Mpa 42 Continuous working pressure Mpa 30 Allowable shell pressure (Absolute) Mpa Constant0.25, Peak value0.5 Torque Continuous output torque (Under continuous working pressure) Nm 162.3 252.3 342.6 432.9 535.3 632.4 Max output torque Nm 227 353 480 606 749 885 Power Continuous output power KW 45 79 107 139 149 176 Max power KW 62 95 114 150 173 205 Temperature Allowable shell temperature ℃ 80 Max working temperature of oil tank ℃ 70 weight LPV series hydraulic pump hydraulic oil drain kg 45 46 63 64 82 88 LPV series hydraulic motor hydraulic oil drain kg 30 30 36 36 36 38 Notices: Hydraulic oil The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions. As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours. Heat Exchanger The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed. Tank: The tank level and the water present in the oil should be checked daily. If the tank must be filled with oil, filtered hydraulic oil must be used, and all water in the tank must be removed as required. Silage machine hydraulic motor pump system application: Mixer truck: concrete mixer truck, cement mixer truck; Coal mining machinery: scraper; Industry: pharmaceutical machinery; Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers