LDM2025 Laser Diameter Gauge Tools 0.1mm To 20mm Measuring Range

LDM2025 Non Contact Laser Diameter Gauge Laser Diameter Measurement Tools. Professional measuring outer diameter laser diameter gague for wire cable pipe. (Model LDM1025 LDM2025) 1. A brief introduction LDM1025 Single axis compact laser diameter device is the high-accuracy installment that uses the laser scan to carry on Non-contact the on-line measurement. It is mainly used in measuring of outer diameter and adjusting the extruder screw or traction speed, to control the outside diameter. LDM2025 Dual axis compact laser diameter device is the high-accuracy installment that uses the laser scan to carry on the no-contacts on-line measurement. It (namely X axis and Y axis) simultaneously measure the diameter in two directions. It is overcomes the shortcomming of bi-directional measurement. The display unit can simultaneously show the diameter mean value and roundness of wire and pipe. 2. Technical parameters: LDM1025 Single axis compact laser diameter gauge Type Compact Laser Diameter Gauge Measuring head LDM1025 Controller DDC-7202 Gate Size 25mm Measuring Range 0.1mm - 20mm Min Measured Size 0.1mm Laser Type Visual Red Semi-Conductorlaser 660mm Accuracy ±0.0005mm Repeatability 0.00015mm Data Collection speed 1400 Times/Sec Max Scan speed 82m/s Temperature -10 - 50℃ Humidity 35% - 85% Net Weight 1.4Kg Dimension 263.5×80×45mm Display Type 4.3 Inch Touch Screen Units of Measurement mm or inch Adjustable Resolution 0.0001mm - 0.1mm 0.00001 inch - 0.01 inch Alarm Relay output 2 NO or NC Terminal Analog Output +TOL,-Tol Output PIC Output Control Voltage: 16 bit ± 10V DC Current: 0 - 10 mA ( for Speed Control ) Communication Output RS485 Output port 2 Ways OC Output Controller Dimension 190 × 86 × 270mm Installation Size 164 × 82mm Panel Installation Size 180 × 66mm Features 1. Connect up to four sets of single-axis laser diameter gauge or 2-axis laser diameter gauge or two laser-CCD gauge. 2. Display functions: multi-axis measurements. +Tol, -Tol value,etc. LDM2025 Dual axis compact laser diameter gauge Type Compact Laser Diameter Gauge Measuring head LDM2025 Controller DDC-7202 Gate Size 25mm Measuring Range 0.1mm - 20mm Min Measured Size 0.1mm Laser Type Visual Red Semi-Conductorlaser 660mm Accuracy ±0.0005mm Repeatability 0.00015mm Data Collection speed 800 Times/Sec Max Scan speed 82m/s Temperature -10 - 50℃ Humidity 35% - 85% Net Weight 3.0Kg Dimension 187×240×50mm Display Type 4.3 Inch Touch Screen Units of Measurement mm or inch Adjustable Resolution 0.0001mm - 0.1mm 0.00001 inch - 0.01 inch Alarm Relay output 2 NO or NC Terminal Analog Output +TOL,-Tol Output PIC Output Control Voltage: 16 bit ± 10V DC Current: 0 - 10 mA ( for Speed Control ) Communication Output RS485 Output port 2 Ways OC Output Controller Dimension 190 × 86 × 270mm Installation Size 164 × 82mm Panel Installation Size 180 × 66mm Features 1. Connect up to four sets of single-axis laser diameter gauge or 2-axis laser diameter gauge or two laser-CCD gauge. 2. Display functions: multi-axis measurements. +Tol, -Tol value,etc.