Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
PRODUCT DESCRIPTION
Wireline Diamond Core Drill Bits For Granite / High Performance Core Drill Bit Geological
Drilling NC3
Wedge type NQ bit has a very good fluid evacuation function.
• Helps with the removal of cuttings and debris by flushing the waterways and keeping them free and clean.
Description:
The impregnated diamond bits are manufactured using high quality raw materials for optimum drilling
performance. These impregnated bits present a metallic layer impregnated of diamonds on its cutting face. These impregnated bits are made by mixing fine diamonds with a metallic powder called
matrix. The mixture is then subjected to heat treatment assuring the metallurgical bond of the matrix on the steel blank. To maintain optimal performance during entire bit life, it is important
that matrix wear is synchronized with the diamond wear to ensure exposure of new diamonds with sharp edges.
As to the packing, it is first packaged by cartons, and then put into the plywood case.
Specification:
International Standard:
C series: AC, BC, BC3,NC, NC2, NC3,HC, HC3,PC, PC3
T series:T36,TB56
TT series:TT46,TT56
T2 series: T2 46,T2 56,T2 66,T2 76,T2 86,T2 101
T6 series:T6 76,T6 86,T6 101,T6 116,T6 131,T6 146
B series:B36,B46,,B56,B66,B76,B86,B101,B116,B131,B146
MLC series:NMLC,HMLC
LTK series:LTK48,LTK60
Non-standard also can be made as your requirement.
Application
Our impregnated bits matrices can be selected according to the chart below
Series
Number
Name of Rock
1
sand, soft shale, chalk, marly shale, med-hard limestone ,salt,frozen soil&ice,soft
sandstone,sandy shale,claystone,sandy limestone,soft schist
2-3
soft shale,chalk,marly shale,med-hard limestone,salt,frozen soil&ice,soft sandstone,sandy
shale,claystone,sandy limestone,soft schist,med-hard sandstone,siltstone,alluvial deposits,calcitic limestone
4-5
claystone,sandy limestone,soft schist,med-hard sandstone,siltstone,alluvial deposits,calcitic
limestone,med-hard limestone,hard limestone,hard shale,dolomitic limestone
6-7
med-hard limestone,hard limestone,hard shale,dolomitic limestone,schist,serpentine,hard & mica
schist,siliceous limestone,dolomite,marble,peridotite
7-8
dolomitic limestone,schist,serpentine,hard & mica schist,siliceous
limestone,dolomite,marble,peridotite,andesite,pegmatite,hematite
8
dolomite,marble,peridotite,andesite,pegmatite,hematite,magnetit,metamorph
schist,gneiss,granite,basalt
9-10
andesite,pegmatite,hematite,magnetit,metamorph
schist,gneiss,granite,basalt,gabbro,rhyolite,diorite
10-11
magnetit,metamorphschist,gneiss,granite,basalt,gabbro,rhyolite,diorite,conglomerate,taconite
Technical Parameters:
SIZE
BIT OD Hole Diameter
BIT ID Core Diameter
inches
mm
inches
mm
AQ
1.870/1.880
47.50/47.75
1.057/1.067
26.85/27.10
BQ
2.340/2.350
59.44/59.69
1.428/1.438
36.27/36.53
BQ3
2.340/2.350
59.44/59.69
1.315/1.325
33.40/33.65
NQ
2.960/2.970
75.18/75.44
1.870/1.880
47.50/47.75
NQ2
2.960/2.970
75.18/75.44
1.990/2.000
50.65/50.80
NQ3
2.960/2.970
75.18/75.44
1.770/1.780
44.96/45.21
HQ
3.755/3.770
95.38/96.00
2.495/2.506
63.38/63.63
HQ3
3.755/3.770
95.38/95.57
2.401/2.411
60.99/61.24
PQ
4.795/4.815
121.80/122.30
3.340/3.350
84.84/85.09
PQ3
4.795/4.815
121.80/122.30
3.265/3.275
82.93/83.19