HuaWei NE5000E Interface Board OLT Optical Line Terminal CR5D00E2NC62

HuaWei NE5000E interface board CR5D00E2NC62 CP400-2x100GBase-CFP2 2-port 100G CFP2 flexible card Overviews HW NetEngine5000E Cluster Routers CR5D00E2NC62, 2-Port 100GBase-CFP2 Flexible Card(CP400,Occupy 1 sub-slot). Specifications Part Number 03030TCG Model CR5D00E2NC62 Description 2-Port 100GBase-CFP2 Flexible Card(CP400,Occupy 1 sub-slot) Attributes Hardware Category Line Card Product Line Networking Product Family Router Overview Line Card Sub Product Family NetEngine5000E Cluster Routers Product Series NE5000E-X16 UOM PCS Net Dimension(D*W*H mm) 193*178*37mm Typic Power(W) 70.3 Boards Supported by an NE5000E-X16A The NE5000E-X16A supports 100G, 400G and 1T platforms. A 100G platform NE5000E-X16A uses different MPUs and SFUs than a 400G platform NE5000E-X16A. The following table lists boards supported by an NE5000E-X16A. Boards supported by an NE5000E-X16A Board Type 100G Platform 400G Platform 1T Platform MPU MPUB5 (CR5D0MPUB560) MPUB5 (CR5D0MPUB560) MPUB6 (CR5D0MPUB660) SFU SFUF100C (CR5DSFUFA06C) SFUI400A(CR5DSFUIK06A) used for CLC SFUI400B(CR5DSFUIK06B) used for cluster SFU1TE(CR5DSFUIT06E) used for CLC SFU1TH(CR5DSFUIT06H) used for cluster Item NE5000E Specification Dimensions (H x W x D) (40 U) 1778 mm x 442 mm x 650 mm (70 in. x 17.4 in. x 25.59 in.) (Chassis main body) Weight (empty) 115.7 kg (255.07 lb) (including the backplane, PEM, and PMU and excluding the fan and power module) Weight (full configuration) 100G single-chassis (full configuration): 337 kg (742.96 lb) 100G cluster (full configuration): 346 kg (762.80 lb) 400G single-chassis (full configuration): 364 kg (802.48 lb) 400G cluster (full configuration): 380 kg (837.76 lb) 1T single-chassis (full configuration): 384 kg (846.58 lb) 1T cluster (full configuration): 405 kg (892.87 lb) Cabinet installation standard Can be installed in an 800 mm-deep standard 19-inch cabinet and is installed in a 2200 mm-high Huawei N68E cabinet by default. Typical power consumption 7300 W (100G single-chassis) 7492 W (100G cluster) 10000 W (400G single-chassis) 11000 W (400G cluster) 11000 W (1T single-chassis) 13000 W (1T cluster) Typical heat dissipation 23684.3 BTU/hour (100G single-chassis) 24307.2 BTU/hour (100G cluster) 32444.2 BTU/hour (400G single-chassis) 35688.6 BTU/hour (400G cluster) 35688.6 BTU/hour (1T single-chassis) 42177.5 BTU/hour (1T cluster) DC input voltage input voltage range: -40V to -72V input rated voltage: -48V/-60V AC input voltage Voltage range:180Vac~264Vac. 220 V rated voltage:200Vac to 240Vac. MTBF 20.14 years MTTR 0.5 hours Availability 0.99999 Slot quantity 22 Redundant MPUs 1:01 Redundant Switch fabrics 3+1 Redundant fans Consists of upper and lower areas. (400G) Two fan modules. If a single fan fails, the system can still work for a short period of time at an ambient temperature of 40°C. (1T) Three fan modules. If a single fan fails, the system can still work for a short period of time at an ambient temperature of 40°C. Redundant power supply N+N Forwarding performance 10816 Mpps Switching capacity 40.96 Tbps Operating temperature Long-term: 0°C to 40°C (32°F to 104°F) Short-term: -5°C to 50°C (23°F to 122°F) Remark: Restriction on the temperature variation rate: 30°C/hour (86°F/h) Storage temperature -40°C to 70°C (-40°F to 158°F) Relative operating humidity Long term: 5% to 85% RH, non-condensing Short term: 5% to 95% RH, non-condensing Relative storage humidity 5% to 95% RH, non-condensing Long-term operating altitude 3000M @ 40°C Storage altitude Less than 5000 m (16404 ft.)