Cosmetic Bottle Extrusion Blow Molding Machine 2 Head 10ml Double Station

High Speed Double Station 2 Die Head Blow Molding Machine For Cosmetic Bottle SLBK series 1: the mold head mechanism: the use of the split type of the head, not channeling material, more uniform, more uniform, plating processing, not accumulating material, the material is more smooth. With tie -bar design clamping unit,which is suitable for bulky mold. 2: plasticizing system: frequency conversion motor Hardened reducer with high quality nitride barrel screw, variable frequency speed control, energy efficient and stable yield. 3: electronic control system: the use of PLC man- machine interface, all parameters set, modify, retrieval can be seen as the operation, the system runs stable, accurate positioningIndeed. 4: application areas: food, medicine, petroleum, chemical, chemical, automotive, tools, toys and other industries. 5: can be equipped with automatic overflow device: supporting cutting device and pull the end device, automatic operation, save labor. 6  Note: When the temperature of the hopper and extrusion head doesn’t reach the set temperature, it is forbidden to do any operation like injection, plasticizing, and extraction. Although this machine is equipped with cold-start-prevention function, wrong setting of the temperature (too low) will damage the blow molding machine. So please operate with discretion. SPECIFICATION SLBK-65 MATERIAL 　 PE,PP,EVA,ABS,PS MAX CONTAINER CAPACITY L 5 NUMBER OF DIE HEAD SET 1,2,3,4,6 OUPUT(DRY CYCLE) PC/HR 950x2 MACHINE DIMENSION (LxWxH ) MM 4000x2600x2200 TOTAL WEIGHT TON 7T CLAMPING UNIT 　 CLAMPING FORCE KN 65 PLATEN OPENING STROKE MM 170-520 PLATEN SIZE(WxH) MM 300x400 MAX MOULD SIZE(WxH) MM 400x400 MOLD THICKNESS MM 175-250 EXTRUDER UNIT 　 SCREW DIAMETER MM 65 SCREW L/D RATIO L/D 25 MELTING CAPACITY KG/HR 70 BARREL HEATING POWER KW 15 NUMBER OF HEATING ZONE ZONE 3 EXTRUDER MOTOR RATED POWER KW 15 DIE HEAD 　 NUMBER OF DIE HEATING ZONE ZONE 2-5 POWER OF DIE HEATING KW 6 CENTER DISTANCE OF DOUBLE DIE MM 130 CENTER DISTANCE OF THREE DIE MM 80 CENTER DISTANCE OF FOUR DIE MM 60 CENTER DISTANCE OF SIX DIE MM 60 MAX DIE-PIN DIAMETER MM 260 POWER 　 MAX DRIVE POWER KW 26 TOTAL POWER KW 42 FAN POWER OF SCREW KW 2.4 AIR PRESSURE MPA 0.6 AIR CONSUMPTION M3/MIN 0.5 AVERAGE ENERGY CONSUMPTION KW 18.5