Multi Parameter Hospital Vital Signs Monitor For Ambulance ICU

Multi Parameter Patient monitor with Vital Signs ECG SPO2 NIBP Temp ambulance patient monitor ICU vital signs monitor 12.1" Portable Multi parameter Patient Monitor general ward and clinic monitoring bedside cardiac monitor Beta 12S Portable Patient Monitor Quick Details: Central Station Touch Screen IoC/BIS (12.1 inch only) Suntech NIBP/Massimo SPO2 Large 12.1 “ TFT LCD display 7 Channel selectable waveforms Programmable NIBP cycles Programmable alarms Simultaneous display of all parameters Hung-Kee Patient monitor Brochure Portable Patient Monitor Technical details: Table ECG Specifications Parameter Specifications CMRR (common mode rejection ratio) ＞90 dB HR measurement and alarm range Adult/Pedi: 15bpm - 300bpm Neonate: 15bpm - 350bpm HR accuracy 1bpm or 1%, whichever is greater ECG channel Up to 7channels ST range -2.0 mV - +2.0 mV ST accuracy 0.02 mV or 10%, whichever is greater Pacemaker pulse rejection capability Meets AAMI EC 13 ECG leads 5-lead Alarm indication Visual and audible indicators QRS indicator Audible tone and heart symbol flashes ECG speed 12.5 mm/s, 25.0mm/s, 50.0 mm/s ECG gain ×0.25,×0.5,×1,×2,×4, Auto Bandwidth Monitor mode: 0.5 Hz - 40 Hz  Operation mode: 1.0 Hz - 25 Hz  Diagnostic mode: 0.05 Hz - 100 Hz  Tall T-wave rejection capability Exceeds ANSI/AAMI EC 13 minimum recommended 1.2 mV T-wave amplitude Heart rate alarm response time <12s Defibrillator protected Tested with5kV Recovery time following defibrillation < 5s Signal delay 0.5s Auxiliary current (leads off detection) Active electrode:< 100nA Reference electrode: < 900 nA Heart ratemeter accuracy and response to irregular rhythm Ventricular bigeminy: 80 bpm±2bpm Slow alternating ventricular bigeminy: 60 bpm ±2bpm Rapid alternating ventricular bigeminy: 120 bpm ±2bpm Bidirectional systoles: 90 bpm±2bpm Response time of heart rate meter to change in heart rate HR change from 80 bpm to 120 bpm: ≤ 8 s maximum HR change from 80 bpm to 40 bpm: ≤ 10 s maximum Time to alarm for tachycardia Vent tachycardia (1 mVpp, 206 bpm): Gain 0.5, range 6.5 to 8.4s, average 7.2s Gain 1.0, range 6.1 to 6.9s, average 6.5s Gain 2.0, range 5.9 to 6.7s, average 6.3s Vent tachycardia (2 mVpp, 195 bpm): Gain 0.5, range 5.4 to 6.2s, average 5.8s Gain 1.0, range 5.7 to 6.5s, average 6.1s Gain 2.0, range 5.3 to 6.1s, average 5.7s ECG analog output 0.67 Hz - 40 Hz Time to alarm for high heart rate ≤10s Time to alarm for low heart rate ≤10s   ( for more detailed technical data please refer to above PDF brochure) Portable Patient Monitor Description: The Beta 12S portable patient monitor is part of Hung-Kee’s premier patient monitoring solution designed to enhance patient care and support timely and accurate clinical assessment across general ward, daily checking and clinic environments. This portable patient monitor, power supplied by 100-240V~,50/60Hz, adopts 12.1'' color TFT LCD displaying real-time date and waveform. It can synchronously display seven-channel waveform and full monitoring parameters equipped with an optional 48mm thermal recorder. Maximum 64 units portable patient monitor could be connected to the central monitoring system via wire network to form a network monitoring system. Portable Patient Monitor Standard Accessories: 5-lead ECG cable, SPO2 sensor, BP cuff, Temperature probe, Lithium battery, User manual, Power cord Portable Patient Monitor Optional Accessories: Aluminum trolley, wall mount stand FAQ for Portable Patient Monitor: 1.Q: How long is the warranty time? A: 24 Months 2. Q: When do you delivery? A: Usually in 7-30 days depends on the order qty and available of some specific parts. 3. Q: Could you accept OEM order? A: Yes, OEM and ODM are our main business. 4.Q: Do you work on SKD project? A: Yes, we have more than 14 years experience on SKD service, full assembling procedure will be provided, and detailed guidance of local assembling work will be offered. 5. Q: Can I order a sample? A: Sure, delivery sample by global express in charge.