Quick Details
- Processing Time:120 days
- Port:Dalian Seaport
- Supply Ability: 1500 Tons Per Year
- Brand Name:GETAI
Kaplan & Tubular Turbine
Kaplan &Tubular Turbine, IEC & ISO Kaplan Turbine, CFD Kaplan Turbine
Supplier
Kaplan Turbine is suitable for medium & low water head and large flow power plants. With same
water head, the Kaplan runner speed is higher than that of the Francis'. The Kaplan runner blade can be either fixed and rotatory. The key components include: Kaplan runner, Distributor, Main
shaft, Main shaft seal, Turbine guide bearing, Governor, Draft tube, Spiral case.
Tubular Turbines are suitable to lower water head, is a kind of horizontal turbine with straight
flow channel. There is no spiral case in Tubular turbine, and its blades can be fixed or rotatory. The key components include: Tubular runner, Distributor, Turbine guide bearing, Governor among
other.
Shenyang Getai Hydropower Equipment Co.,Ltd is located in Shenyang City, the old Northeastern
industrial base of China. GETAI is a high technology enterprise established in 1992, aiming to supply integral solution for new and old hydropower plants. Its main products include
high efficient Pelton turbine, Francis turbine, Kaplan turbine and relevant products: Pelton Turbine, Francis
Turbine,Pelton Turbine Formula,Kaplan/Tubular Turbine, Pelton
Turbine Generator, Francis Turbine Generator, Double Francis Turbine, welcome to our factory!
Our Kaplan &Tubular Turbine has the features with Kaplan Turbine Design, Kaplan Turbine Advantages. Best quality and factory price will give you
Application scope:
Kaplan turbine
Tubular Turbine
Water Head:
3 ~ 80m
2 ~ 25m
Output:
0.1 ~ 200MW
0.05 ~ 57MW
Frequency:
50/60HZ
50/60HZ
Runner Dia.:
1 ~ 11m
1 ~ 7m
We also provide Casting Pelton Runner, Forged Pelton Runner, Casting Guide Vane, Francis Runner Band Heat
Treatment, Pelton Turbine.
Product Introduction
1. Advanced CFD, FEA technic is utilized in the designing process to ensure better technical
solution
2. CAE casting simulation is adopted for the produciton of casting parts, this advanced
and reliable process plan could help effectively improve product quality.
3. All raw material strictly conform to international standard, such as ASTM, IEC,ISO
etc. key component such as runners, guide vane is Forged and entire CNC machined.
Chemical Composition for ASTM A473 S41500 and ASTM
A743 CA6NM(%)
Material No.
C
Si
Mn
P
S
Cr
Ni
Mo
ASTM A473 S41500
≤0.05
≤0.60
0.5-1.0
≤0.030
≤0.030
11.5-14.0
3.5-5.5
0.40-0.80
ASTM A743 CA6NM
≤0.06
Max1.0
Max1.0
≤0.040
≤0.030
11.5-14.0
3.5-4.5
0.40-1.0
Mechanical Property for ASTM A473 S41500 and ASTM
A743 CA6NM
Material No.
σ0.2(Mpa)
σb(Mpa)
δ5(%)
ψ(%)
Akv (J/cm2)
HB
ASTM A473 S41500
≥620
≥795
≥15
≥45
≥50
≤295
ASTM A743 CA6NM
≥550
≥755
≥15
≥35
≥50
≤285
6. With
the help of 3D Assembling, through motion simulation, the entire organization interaction can be seen at a glance. This helped a great deal for parts processing and pre-installation.
7. Each
project will strictly follow manufacturying plan to ensure the delivery date.
8. ISO
9001 Quality Management system is carried out to ensure better management control