Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
Leakage Tendencies of Greases Tester ASTM D1263
Product model: JF0326
Product Introduction
Load the sample into the modified front wheel hub and shaft assembly, and let the hub and shaft run for a total of 360±5 min under the specified conditions. Measure the leakage of grease or oil,
and observe the condition of the bearing surface at the end of the sample. This instrument is suitable for the determination of the loss of automobile wheel bearing grease, and can be used to
distinguish products with obviously different loss characteristics.
Technical Parameter
1. Applicable standard: SH/T0326 ASTM D1263
2. Heating method: metal bath heating
3. Temperature control method: imported PID temperature controller
4. Temperature control range: normal temperature～150℃±0.1℃
5. Timing mode: digital display four-digit timer
6. Timing range: 0.01s～99h99m
7. Motor speed: 660r/min±30r/min
8. Power of the whole machine: 1KW
9. Working power supply: AC220V/50HZ
Performance Characteristics
1. The instrument adopts an integrated design with a timeless appearance and easy operation;
2. The heat pipe rod is inserted into the box-type heating system of the cast body, which makes the heating speed fast and the temperature control is high;
3. The imported motor rotates with low noise, stable speed, good mechanical performance and low wear;
4. The rotating hub and shaft assembly has a compact structure and small end clearance. The bearings are all imported components, which guarantees reliability and wear resistance;
5. Microcomputer temperature controller, digital display, ±0.5℃ PT100 sensor;
6. Digital display timer to record test time;
7. There is a thermometer hole on the shaft assembly;
8. Standard motor 660r/min±30r/min;
9. The total heating power of the two groups is 660W;
10. The box body is surrounded by thermal insulation cotton for heat insulation;
