Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
PRODUCT DESCRIPTION
Customization Wholesale 5052 Aluminum Coil Aluminium Alloy Metal Sheet
Roll
Product Description
Aluminum and its alloys are considered one of the most practical of metals. Its low
cost,light-weight, and modern appearance are among the primary reasons for its widespread use. It is non-sparking, electrically conductive, thermally conductive, non-magnetic,
reflective, and chemically resistant. It is popular in the construction, marine and aircraft industries because of its ease of fabrication, non-toxicity, strength, and resistance to
the corrosive atmospheres of industry and marine environments. Anodizing increases this corrosion resistance and also permits iridescent finishes in different colors. Some alloys
are slightly corrosive and so are cladded with a thin layer of aluminum for added protection.
Products Name
Aluminium Coil
Alloy/Grade
1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251,
6061, 6063, 6082, 7075, 8011, 8079, 8021
Temper
F, O, H
MOQ
5T for customized, 2T for stock
Thickness
0.014mm-20mm
Packaging
Wooden Pallet for Strip & Coil
Width
60mm-2650mm
Delivery
15-25days for production
Material
CC & DC route
ID
76/89/152/300/405/508/790/800mm
Type
Strip, Coil
Origin
China
Standard
GB/T, ASTM, EN
Loading Port
Any port of China, Shanghai & Ningbo & Qingdao
Surface
Mill Finish, Anodized, Color coated PE Film Available
Delivery Methods
By sea: Any port in China
Certificates
ISO, SGS
Alloy Series
Typical Alloy
Introduction
1000 Series
1050 1060 1070 1100
Industrial Pure Aluminium. In all series, 1000 series belongs to the series with
the largest aluminium content. The purity can reach over 99.00%.
2000 Series
2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17
Aluminium-copper Alloys. 2000 series is characterized by high hardness, in which
the content of copper is the highest, about 3-5%.
3000 Series
3A21, 3003, 3103, 3004, 3005, 3105
Aluminium-manganese Alloys. 3000 series aluminium sheet is mainly composed of
manganese. The manganese content ranges from 1.0% to 1.5%. It is a series with better rust-proof function.
4000 Series
4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A
Al-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%. It belongs to
building materials, mechanical parts, forging materials, welding materials, low melting point, good corrosion resistance.
5000 Series
5052, 5083, 5754, 5005, 5086,5182
Al-Mg Alloys. 5000 series aluminium alloy belongs to the more commonly used alloy
aluminium series, the main element is magnesium, the magnesium content is between 3-5%. The main characteristics are low density, high tensile strength and high
elongation.
6000 Series
6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02
Aluminium Magnesium Silicon Alloys. The representative 6061 mainly contains
magnesium and silicon, so it concentrates the advantages of 4000 series and 5000 Series. 6061 is a cold-treated aluminium forging product, which is suitable for
applications requiring high corrosion resistance and oxidation resistance.
7000 Series
7075, 7A04, 7A09, 7A52, 7A05
Aluminium, Zinc, Magnesium and Copper Alloys. The representative 7075 mainly
contains zinc. It is heat-treatable alloy, belongs to super-hard aluminium alloy, and has good wear resistance. 7075 aluminium plate is stress-relieved and will not deform
or warp after processing.
Chemical Composition(%)
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
Zr
Al
1235
≤0.65
(Fe+Si)
≤0.05
≤0.05
≤0.05
-
-
≤0.10
≤0.03
-
≥99.35
1145
≤0.55
(Fe+Si)
≤0.05
≤0.05
≤0.05
-
-
≤0.05
≤0.03
-
≥99.45
8011
0.50-0.9
0.6-1.0
≤0.10
≤0.20
≤0.05
≤0.05
-
≤0.10
≤0.08
-
Remainder
8079
0.50-0.3
0.7-1.3
≤0.05
-
-
-
-
≤0.10
-
-
Remainder
Package
Application
Company Introduction