Quick Details
- Processing Time:about 1-4 weeks
- Port:Ningbo Port
- Supply Ability: 1000 Pieces Per Month
- Brand Name:KMO
The KRYG1B4F type filter is an indispensable device in the pipe system
that conveys gas and other media. It is generally installed at the inlet of gas equipment, used for removing particle impurities in natural gas, liquefied petroleum gas and other media and
protecting normal use of valves, flow meters, pressure control devices, etc.
Product description:
1. Material: WCB, SUS304, aluminum alloy, PTFE gasket, O rubber ring, etc.
2. Filter meshes: according to user, usually between 80-700 M/in²
3. Norminal Pressure: 0.6 MPa
4. Design temperature:-29ºC- +60ºC
5. Connection: flanged connection, female thread connection.
6. Flange Standard: GB JB HG GOST ANSI JIS DIN BS NF
7. Features: durable, the differantial pressure gauge with the memory of the max data, easy to installation.
8. Design and Manufacturing Standards: SH/T3411-1999, HG/T21637-1991, GB/T36051-2018
Notes for use:
a. Keep the filter cavity clean before installation to prevent impurities from entering and affecting the use
effect.
b. When the filter is tested for hydraulic strength, the intake valve should be closed first. After the test is completed, use 0.6MPA air pressure to conduct airtightness test on the filter,
differential pressure gauge and pressure guide tube. After the pressure is stabilized, slowly open the two intake valves at the same time to avoid damage to the differential pressure gauge caused
by excessive unilateral pressure .
c. According to the working conditions on site, it is recommended to periodically drain and clean the filter
d Reminder for opening fluid. When the pressure difference table shows that the inlet and outlet pressure difference reaches 0.03MPA (or specified by the user), it is recommended to clean the
filter element. Cut off the inlet and outlet valves of the filter, and ensure that there is no pressure and medium in the inner cavity, take out the detachable filter element, use a brush to
gently remove impurities, and then clean and reload. If the cleanliness of the filter element still cannot meet the working conditions after cleaning, it is recommended to replace with a new
filter element.
e. After each cleaning, you need to re-test to ensure the tightness of the product, and replace the air in the filter with nitrogen.
f. Close the intake valve before venting, and slowly open the two intake valves at the same time after the pressure is stable, to avoid damage to the differential pressure gauge caused by
excessive unilateral pressure.
FAQ:
Q: Are you manufacture or trading company? A: We are manufacture and our factory is in in Oubei Town, Yongjia
County, Wenzhou City, Zhejiang Province.
Q: What is your products' MOQ?A: 10pcs.
Q: Can you provide the sample for free?A: Yes, we can provide the sample for free, but you need bear the
delivery cost.
Q: If products have some quality problem, how would you deal
with?A: We will responsible for all the quality problems.
Q:If the product can be customized?A: Yes, just let me know if you have any requirements, like
applicable medium and size, etc.