Amubulance Stretcher/Patient Transport Stretcher

I.Technical parameters:<br />1. product Size: (LxWxH):High position :190*x55x2300px  Low position:190x55x625px<br />2. Maximum Angle of the Back:75°  3. Carton Size(1pc:195x62x637.5px)  4. N. W.:40kg   G.W.:46kg  5. Load Bearing:≤159kg<br />II. How to use:<br />1. The stretcher surface is made of soft sponge mattress, which make patient feel comfortable. One medical staff can push the trolley onto the ambulance or send to ward.<br />2. When need low position, pull out the safety handle & then press it, the stretcher's height will automatically lower down.<br />3. When destination arrived, pulling out the safety handle, the stretcher's legs will unfold automatically.<br />4.There are the return elastic lock device at both side of the stretcher & the leg parts. Lock tightly when turn up for patient safety, turn down for patients out.<br />5.Pressing the button under the stretcher, the head part will be raised or lowered.<br />III. Applied for:Approved by clinic practice, this item is suitable for ambulance, hospital battlefield, gym, etc. to carry the wounded & patients. It also can be used in general operation.<br />IV. Cautions:<br />1. When carrying patients with this stretcher, be sure lock tightly the fender locking device & fasten the safety belt for safety sake.<br />2. in general operation, be careful not to out torn the stretcher surface.<br />V. Maintenance:<br />1. Keep clean as routine (incl. sterilization);2. Often check if any parts loose or not.<br />VI. Storage & transportation:<br />1. Store this product in the place of damp proof & non-corrosion;2. Common transporting vehicle can carry this product.