Flattened Expanded Metal Mesh

Flattened expanded metal is regular expanded metal which has been cold rolled, leaving a smooth, flat surface. The product is available in carbon steel, stainless steel, galvanized and aluminum alloy. If a finished edge is required, U-Edging is available in aluminum, carbon steel and stainless. Common Applications for Flattened Expanded Metal:• Guards • Fencing • Panels • Grating • Stairs • Grills • Screens • And So Many More Features of Expanded Metal:• Economical • Durable • Extremely Versatile • Easy To Install • Low Resistance To Wind Loads • Easily Cut To Fit • Many Material Options Stainless steel flattened expanded mesh. dimensions as follows: Pattern type: 0798S Grade: 304 or 316 (preferred) Thickness: 0.9mm LWD: 19.08 SWD: 7.26 Strand Width: 1.710mm flattened expanded mesh titanium and stainless steel. the material should be 0.001" (~0.025mm) thick. following configuration: thickness: 0.001" long diagonal: 0.020" short diagonal: 0.012" strand width: 0.008" 3/16 X .050 flattened expanded aluminum in a 3003 series Stainless Steel Expanded Sheets, Flattened to smooth surface finish and re-squared cut to the following dimensions and specs: Diamond size 1/16" (SWD) x 1/8" (LWD), and strand width of 1/8" Length (SWD) 36.625" tolerance +/- 1/16" Width (LWD) 18.025" tolerance +/- 1/16" Strand thickness (after flattening) 0.030"- 0.035" flattened expanded metal sheets: Un- galvanized ( black ) Flattened Size of sheet 1.25 mtr x 2.5 mtr 3.0 mm thickness 4.0 mm strand width 27.5 short way mesh x 50.8 long way mesh ( Hole: 19 mm x 41 mm ) flattened expanded aluminium sheet with the below specifications: Material = Aluminium LWO = approx. 16mm SWO = approx. 8mm Strand thickness = 2mm Pre-cut dimension = 4,950mm x 240mm HDG Expanded Mesh (Flatten after punching) Size: 1220 x 2440mm 25mm x 75mm x 2.5mm x 2.5mm