Wear Resistant Plate

Wodon wear resistant parts 1. Wear resistant steel plate:     Medium/low carbon steel+abrasion resistant layers→wear resistant steel plate with metallurgical bonding     Q235/Q345B+Chromium Carbide overlay→wear resistant composite plate with Submerged arc or Open arc welding 2. Process: All kinds of Liners are made of wear resistant steel plate by cutting, bending, punching, bolting and welding.                     According to customer's drawings. 3. Standard size: Customer's Requirement                             Open arc welding plate : 1.4 m*3.4 m, 1.5*3.0 m, 2.0*3.0 m, customized                             Submerged arc welding plate : 1.4 m*3.0 m, 1.4 m*3.5 m, 2.1 m*3.5 m, customized 4. Certification: ISO9001:2008; OHSAS 18001-2007; ISO14001:2004 5. Detail:       The overlay alloy has a high amount of chromium carbide hard particles. These particles are distributed evenly throughout the layer, creating a strong microstructure. The hardness is HRC 55~65 and depends on the overlay's thickness.      The main ingredients of Wodon plate are C(%): 3.0~5.0 and Cr(%): 25~40. This chemical proportion results in a large amount of chrome carbide hard particles. The micro-hardness (up to HV1800) of these particles throughout the layer will guarantee a super wear resistant surface. Product name Wodon wear resistant chute liner with bimetal plate Material Q235/Q345+Chromium carbide overlay alloy Certificate ISO9001:2008 Chemical composition C: 3.0~5.0 % Cr: 25~40 % Microstructure Chromium carbide hard particles volume fraction above 50 % The maximum hardness of chromium carbide is HV 1800 Wear Resistance Our test shows that the wear resistance of Wodon plate is 30 times higher than low carbon stell and 12 times than heat treated steel Impact resistance Wodon wear plates can withstand medium impact Temperature resistance Wodon wear plates can withstand temperatures up to 600 ºC. We can customize high temperature resistance wear plates according to customer's requirements which can withstand maximum terperatures up to 900 ºC Flatness tolerance ± 3 mm/m Thickness tolerance Uniform overlay thickness, with tolerance within 0~0.5 mm Surface treatment hardfacing, cladding, open arc or submerged arc welding Standard sizes Open arc welding: 1.4*3.4 m, 1.5*3.0 m and 2.0*3.0 m, customized Submerged arc welding: 1400*3000 mm, 1400*3500 mm, 2100*3500 mm, customized The main thicknesses (mm) 3 on 3, 4 on 4, 5 on 5 4 on 6, 5 on 6, 6 on 6, 8 on 6 4 on 8, 5 on 8, 6 on 8, 7 on 8, 8 on 8 4 on 10, 5 on 10, 6 on 10, 7 on 10, 8 on 10, 9 on 10, 10 on 10, 20 on 10 4 on 12, 5 on 12, 6 on 12, 7 on 12, 8 on 12, 10 on 12, 11 on 12, 12 on 12 6 on 14, 8 on 14, 10 on 14 6 on 16, 8 on 16, 10 on 16 6 on 18, 8 on 18, 10 on 18 5 on 20, 6 on 20, 8 on 20, 10 on 20, 20 on 20, 10 on 30, 10 on 40, and Customized In the picture there are many cracks, please don't worry. The wear resistant steel plate is not broken and the cracks are good to release the thermal stress. Wodon wear plate is composed of many welding beads and the overlay contains a series of evenly spaced hairlike cracks (The cracks are distributed throughout the overlay thickness, but end up on the base plate's surface). These transversely distributed cracks relief the structure's tension improving wear resistant steel plate's performance like mechanical properties and the overlay don't fall off the base metal. Wodon hardface wear plate is composed of many welding beads and the wear resistant overlay contains a series of evenly spaced herringbone cracks.These transversely distributed cracks relief the structure's tension improving wear plate's performance. The Cracks are distributed throughout the overlay thickness, but end up on the base plate's surface.Those Cracks don't have any effect to the machining properties and no fall off the wear resistant overlay. The wear resistant overlay and base plate are metallurgical bonding. The overlay will penetrate into base plate about 0.8~1.8 mm by welding heat. In our tests are the bonding strength reaching up to 350 MPa. Tianjin Wodon Wear Resistant Material Co., Ltd is located in Tianjin city, China's northern international shipping center. We are specialized in researching, developing and producing wear resistant products with many years experience in this field. We have more than 300 employees, with an annual output of 140000 squaremeters of wear plates and 9000 tons of welding consumables. Packaging: Steel pallet, Non fumigation pallets, Plastic Film, Customized Packaging Size: 1.4*3.4 m, 1.5*3 m, 2*3 m, 1.4*.3.0 m, 1.4*3.5 m, 2.1*3.5 m, customized. Delivery Detail: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity. Loading into 20 ft or 40 ft container.