Huatao Corrugator Belt

Huatao Group - Corrugator Belt & Spare Parts Web:        www(dot) Email: maple   maple(at)  Tel: 0086 133 8311 0583 WhatsApp: 0086 133 8311 0583 Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines.                             Corrugator belts Inwoven Aramid Edge- Specification   Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 80 meters Heat-resistance 240℃ (the kevlar edge upto 350℃) Tensile strength 70Mpa Coefficient of friction ≥ 0.40µ Weight per unit (7.5±0.3)kg/㎡ Air-permeability 40mm water Column 2.0m³/㎡ min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt Lifetime 50-70 million meter Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise                     Corrugator Belts with Silicone Coating Technical Parameters   Product High Speed Corrugator Belt Thickness 9mm Width range 1400mm - 3200mm Length 80 meters Heat-resistance 240ºC (the kevlar edge upto 350ºC) Tensile strength 70Mpa Coefficient of friction ≥ 0.40µ Weight per unit (7.5±0.3)kg/m2 Air-permeability 40mm water Column 2.0m³/m2/min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt,Bottom  belt,Upper belt ,Lower belt