5V3a 5v6A 20a 30a 50a 60a 5v100a Lithium Battery Capacity Analyzer Tray Fast LoadingEnergy Regenerative Function

Li Ion Battery Charge Discharge Testing prismatic lithium battery cell sorting 5v30 5v50a 5v100a charging discharging tester Functional characteristics This machine is a dividing cabinet used for testing prismatic lithium batteries, including: a dividing cabinet body, which has a cavity for placing multiple batteries and an opening for taking and placing multiple batteries; Multiple positioning components arranged within the cavity for positioning the battery; Multiple quick clamps, with a fixing plate at the end of the telescopic rod for fixing the positive and negative heat dissipation probes; The fast clip is used to drive the positive and negative heat dissipation probes to move up or down simultaneously; And a positive heat dissipation probe and a negative heat dissipation probe fixed on the fixed plate. After the battery is positioned by the positioning component, the positive and negative heat dissipation probes are quickly clamped and pressed to contact the positive and negative poles of the battery, respectively, to conduct capacitance testing on the battery, significantly improving the efficiency of capacitance testing Machine characteristics 1. Single point independence, which can control the ground force for each battery test channel; 2. Battery reverse connection hardware and software protection function; 3. Ensure high stability of measurement and operation within 0.05% of equipment progress; 4. TCP/IP network communication mode, with a data recording time of up to 0.1 seconds per time; 5. The software has powerful functions and the human-machine interface operation is simple and easy to understand; 6. The voltage and current loops are designed independently to ensure smooth and stable charging and discharging processes; 7. Simple, convenient, and fast maintenance; 8. Equipped with power outage hardware and software protection, test data hard disk storage, without data loss; 9. It has the function of abnormal termination test continuation; 10. Energy saving charging, environmental protection, efficiency, and fast cost recovery of electricity bills; 11. Multi channel equipment can be split and used in parallel, and can be customized; 12. Temperature detection, with one temperature measurement channel, customizable; 13. Flexible fixtures, easy to use, and strong compatibility Application: 1. Supercapacitors, power batteries, energy storage batteries 2. Power battery formation and capacity division, cycle life testing, charging and discharging rate 3. Battery aging, capacitance and cycle life testing, etc Specification Communication method TCP/IP (network port) Channel control mode Single point independent control Energy-saving efficiency of charging 80% Charging voltage 0-5V Port discharge voltage 5-1.5V Recharging current 0.02A-3A-640A Discharge feedback efficiency  75% Discharge current 0.4A-3A-640A Voltage accuracy ±(0.05% RD+0.05% FS) Current accuracy ±(0.05%RD+0.05%FS) 512 Channel 5V 3/5/6A Lithium Battery Capacity Analyzer with Energy Regenerative Function&Tray Loading 1.System principle: The equipment is controlled by computer connection, sending instructions and collecting data; The keyboard can manually operate the equipment and display parameters and status; Under the command of CPU, the constant current board has the function of constant current and constant voltage; When the battery is charged, the two-way power supply converts the AC into 12V DC, and the charging control and detection of the battery are realized through the constant current board; When the battery is discharged, the process is opposite to charging. Firstly, the battery voltage is increased to 12V through the constant current board, and then the DC is transformed into AC through the two-way power supply, which is directly fed into the AC distribution network of the factory, so as to realize the energy feedback of battery discharge electric energy. Remarkable power saving effect: according to the actual measurement, the power consumption of the equipment during charging is more than 40% lower than that of traditional equipment, the comprehensive power saving rate is more than 60%, and the power consumption is more than 60%, which saves a lot of costs for battery manufacturers 2.System composition： 1. Lithium battery forming and capacity dividing equipment 2. Computer with USB interface (self provided) 3. USB to 485 interface converter and communication line 4. Battery scanning system 5. System software 3.System features: Single point independence, each battery has an independent constant current and constant voltage source, which is stable without impact. The accuracy of the equipment is 0.1% and the stability is high. The software has powerful functions and friendly man-machine interface. Four wire test interface to ensure high measurement accuracy. Modular design concept, easy to maintain. 4.The structure of the equipment is mainly composed of the following parts: 1. Independent CPU board, equipped with keyboard board, front and back sides operate independently, and the whole cabinet sends and controls uniformly; 2. 8-channel constant current and constant voltage control module. 3. Bidirectional AC / DC inverter module. 4. Probe clamp Number of equipment channels 512 channels(Single CPU control) Constant current range Charging DC 30mA ~ 3A; Discharge DC 30mA ~ 3A, resolution 1mA Size 550mm W× 1622mm L× 1840mm H Chassis color Standard gray black (customizable) Fixture form Probe clamp Support battery specifications Adjustable within 10 ~ 100mm Channel control mode Each battery has an independent constant current and constant voltage source, which is stable without impact. Start, stop, pause, continue and protection can be realized Each channel has independent constant voltage and constant current hardware control circuit Fine tuning and calibration of charging current and discharge current accuracy of each channel Working power supply AC380V±10%，50HZ Power factor ≥0.99 AC current distortion rate ≤2% Charging efficiency of the whole machine ≥75% Feed network conversion efficiency ≥70% Working power consumption ≤9KW Equipment failure rate <1% work environment Temperature - 10 ~ 40, relative humidity 80% Heat dissipation mode Natural air intake and upward exhaust Channel parameters Voltage measurement range DC 0~5V Battery voltage range Charging DC 0 ~ 4.5V; Discharge DC 4.5 ~ 2V Constant voltage range DC 2~4.5V Voltage accuracy ± (1 ‰ reading + 1 ‰ full scale), resolution 1mV Voltage stability ≤（±1mV） Current range Charging DC 30mA ~ 3A; Discharge DC 30mA ~ 3A Current accuracy ± (1 ‰ reading + 1 ‰ full scale), resolution 1mA Current stability ≤（±1mA） Software function control mode Computer control equipment, whole cabinet control, with scanning system Communication mode 485 serial port communication (baud rate 57600) Process settings Up to 32 steps and 256 cycles can be set Charging mode Constant current, constant voltage, constant current and constant voltage Charging cut-off condition Voltage, current, time, capacity, -△ V Discharge mode constant current Discharge cut-off condition Voltage, time and capacity Protection function Over voltage, under voltage, over current, under current, over capacity protection, power-off protection, data breakpoint recovery Time frame 0 ~ 999 minutes / work step, and the time unit is min Time accuracy ≤±1‰ Sampling inspection cycle ≤ 8 seconds Battery sorting Sort according to (capacity, time, open circuit voltage, discharge platform, etc.) Data processing It can record voltage, current, time and capacity data, automatically calculate constant current charging ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data, and provide data curve and cycle diagram; It can output and generate text, Excel, WODR or MDB database format files Basic functions of software 1. The software supports various continuation, such as manual pause continuation, software shutdown continuation Power failure interruption continuation, equipment communication interruption continuation, abnormal stop continuation; 2. It supports bar code scanning, and can scan one-dimensional code and two-dimensional code in order Code scanning, channel skipping code scanning, loading code scanning and other code scanning methods; 3. Local test detailed data storage, you can view the current test of each channel at any time Data and historical data, there are two ways to correspond data and curve Now, it supports exporting excel reports in single or batch form. In addition You can set the automatic data import at the end of the test as needed. 4. Support capacity sorting and grade sorting of batteries; 5. Support the qualified judgment after the test, according to the specified cycle capacity, voltage and time Judge the pass / ng result based on the information such as time interval; 6. Support all kinds of work step protection and global voltage, current and temperature abnormal protection (Department) The sub equipment is equipped with), and carries out abnormal alarm to support overcharge and over discharge protection of battery pack Protection test; 7. Support channel parallel connection (optional according to equipment); 8. Support company conversion; 9. Support database server background storage or MES docking; 10. Software offline protection; 11. The software provides free upgrades.  Good quality machine! We provide all kind of lithium battery pack assembly machines and solutions with good quality and services. Our products including: 1.IR tester 2.Capacity tester for cylindrical &prismatic&polymer cells 3.BMS tester 4.Sorting machine for common use 5.Insulation paper sticker machine 6.Manual spot welding machine 7.Automatic spot welding machine 8.Battery pack integrated tester 9.Battery pack charging discharging aging machine battery pack charge discharge tester 10v,15v,20v,30v,60v,70v,100v,120v capacity tester cell charge discharge tester 5v,3A/6A/10A/20A/30A/50A/60A/100A/200A Bms tester 16 series 20s 24s 32s,48Series battery pack function tester 100v 120A 200A 10.PVC shrinking machine 11. Nickel plate&PVC cutting machine 12.Laser welding machine 13.Wire bonding machine and etc. Machines used in manufacturers of batteries for Power bank, Solar,laptops,E-Vehicles, E-Bikes,E-Tools,toy,Mobile phones,Energy storage and etc. All of our products are good price. If you have any interesting,please contact with us you can reach me For more details pls contact : Jenny (Manager)  sales.jxcgroup（@) WhatsApp/WeChat/phone number is +8618098919495