Solar/E-Vehicles/E-Bikes Battery Cells 5v3a 5v6a 5v20a 5v100a Capacity Tester Sorting Machine

5V6A 512 Channel Li-ion Battery Charging Discharging Tester for Cylinder Cell and Pouch Cell Capacity Testing  Ⅰ、Features: 1. Each device can carry out constant current and constant voltage charging and constant current discharge test on aitop  512 batteries meeting the voltage range. 2. Adopt the constant current constant voltage power supply of the invention patent, constant current to constant voltage switching without impact, especially suitable for the charging requirements of lithium-ion battery. 3. The AVR single-chip computer is used as the control center of the equipment, and the peripheral sampling circuit is used. The equipment can be controlled by the superior computer. When the computer is connected, the complete charge discharge curve of all channels can be saved, or it can be separated from the superior computer. Through the operation of the control panel, the constant current and voltage charging, constant current discharge test, time sorting and other work can be completed. 4. Each battery has an independent constant current and voltage source, and the self-made circuit does not affect each other. 5. Detect the voltage of each battery in real time. When charging, charge at constant current first. When the battery voltage reaches the set value, it will smoothly switch to constant voltage charging. When the set time or current termination conditions are met, the charging will end. During constant current discharge, when the battery voltage is lower than the set value, the discharge is ended and the corresponding battery indicator light is on. 6. It has the function of power-off protection, and can continue to operate after receiving the original workflow 7. The power tube is 50N06, which is suitable for batteries requiring low discharge voltage, such as lithium iron phosphate battery  8. The upper computer can set 32 working step parameters and 256 cycles, and each upper computer can be connected with 1-10 sets of single-chip system (less than 10 sets are recommended). Ⅱ、Supporting Software Functions: A) Graphic operation interface is used to display the data of voltage, current, time and capacity of each battery, and display the corresponding working status and abnormal conditions in various colors; B) Battery capacity indication of any section (up to 100 sections); C) Data points can be recorded according to the change conditions of voltage, current and time to form a complete charging and discharging curve data, and the time interval of curve data points is ≤ 4 Second;  D) Carry out battery sorting function under various conditions (capacity, time, open circuit voltage, discharge platform, etc.); E) Automatically calculate constant current charging ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data; F) Set operator authority and operate in different levels; Display charge discharge curve and cycle chart; Contact us for more details about Battery Charge Tester! For more details pls contact : Jenny (Manager)  sales.jxcgroup（@) WhatsApp/WeChat/phone number is +8618098919495 Ⅲ、Main Technical Parameters Number of Device Channels The whole machine has 512 channels in total Workflow Control Mode Whole cabinet control Charging Mode Constant current and constant voltage Charging Cut-off Conditions Voltage, current, time, capacity Discharge Mode Constant current Discharge Cut-off Conditions Voltage, time and capacity Sampling Inspection Cycle ≤10s Voltage Measurement Range 0 ~ 5V, Resolution 1mV Battery Voltage Range Charging: 0 ~ 4.5V, Discharging: 4.5 ~ 2V Constant Voltage Range 3~4.5V Voltage Accuracy ±（0.05%RD+0.1%FS） Current Range Charge 0.025-6A, Discharge 0.025-6A, Resolution 1mA Current Accuracy ±（0.1%RD+0.1%FS） Time Frame Any setting within 0 ~ 30000 minutes, time unit is min Time Accuracy ≤±0.1% Fixture Type Cylindrical four wire fixture Fixture Spacing 35mm Support Battery Height 0~90mm Working Power Supply Three phase four wire system, AC380V ± 5%, 50Hz, power consumption ≤ 28KW Communication Mode RS485, baud rate 57600 Overall Dimension 1440mm（Width）*500mm（Deep）*1840mm（High） Work Environment Temperature: 0-40 ℃, relative temperature ≤ 85% Full Load Operating Current he maximum phase line is 30A, and the maximum zero line is 3A Equipment Starting Current The closing moment of air switch is about 60A Machine weight About 250 kg We provide all kind of lithium battery pack assembly machines and solutions with good quality and services. Our products including: 1.IR tester 2.Capacity tester for cylindrical &prismatic&polymer cells 3.BMS tester 4.Sorting machine for common use 5.Insulation paper sticker machine 6.Manual spot welding machine 7.Automatic spot welding machine 8.Battery pack integrated tester 9.Battery pack charging discharging aging machine battery pack charge discharge tester 10v,15v,20v,30v,60v,70v,100v,120v capacity tester cell charge discharge tester 5v,3A/6A/10A/20A/30A/50A/60A/100A/200A Bms tester 16 series 20s 24s 32s,48Series battery pack function tester 100v 120A 200A 10.PVC shrinking machine 11. Nickel plate&PVC cutting machine 12.Laser welding machine 13.Wire bonding machine and etc. Machines used in manufacturers of batteries for Power bank, Solar,laptops,E-Vehicles, E-Bikes,E-Tools,toy,Mobile phones,Energy storage and etc. All of our products are good price. For more details pls contact : Jenny (Manager)  sales.jxcgroup（@) WhatsApp/WeChat/phone number is +8618098919495 TWSL-50 Feature 1 ,Imported energy storage power, welding voltage lockout technology to prevent network pressure fluctuations in the welding current. 2 ,Welding adjustable pulse width, small spatter, weld discoloration. 3 ,Discharge of imported IGBT module, enabling single-pulse and double pulse with multi-pulse welding. 4 ,Advanced technology: the continuous exchange with the international advanced inverter technology improvement and innovation. Dual pulse welding, welding and continuous pre-welding. Pre-solder oxide removal, remove debris, reducing the spark,, Continued solder joint cosmetics firm, no black, solder joints uniform size burr, does not affect the appearance of the product. 5 ,Adjustment easy to use: solder pin spacing is adjustable, suitable for fine components welding, alignment accuracy, high yield. Scope: 1 ,This professional welder power battery cells (thick slices 0.5mm or less) welding design. 2 ,18650 nickel belt suitable for welding, soldering connection battery, button cell welding, with guide wire between the nickel-metal hydride batteries and lithium batteries, nickel plate aluminum alloy nickel composite tape, appliance parts and welding wire, light bulbs foot welding, welding mobile power and cell phone battery. Welder MPU microcomputer control, pneumatically operated, small dimensions, with a protection circuit and alarm display, welding preheat wave, voltage fluctuation automatic compensation function to ensure stable energy output, high joint quality, easy maintenance, can improve the welding effectiveness. Suitable for high-volume production line. battery pack line Jenny (Manager) Cel: +8618098919495   Shenzhen TWSL New Energy Battery Equipment Co., Ltd TWSL-350 automatic labeling insulation paper Product name Sticker Label Machine Input gas source 0.4-0.8Mpa Function Style: step motor with pneumatic Input voltage: AC220V Sticker Matrials: Barley paper or PVC Sticker Matrials Size: Barley paper Maxium 350mm;Scroll Internal Diameter 72-75MM Adaptable Battery Cell 18650 battery Plus-n-Minus Power: Electric power or pneumatic Control Instrument: 7.5feet contact screen,PLC programming machine and step motor Electrodes to the body distance 100 mm (Scalable adjustable) Producivity: 65pcs/min; singal 4pcs External dimensions 1.3M*1M*1.3M Features: 1 . Stickers pasted stable, consistent, and long lasting. 2. Automatic failure alarm. 3. Easy to program, adjust, and opertate for new hands. 4. High Efficiency, fully automatic, saving labour cost. TWSL-700 18650 26650 32650 CNC Automatic Spot Welding Machine Features: 1.For 18650 battery. Mobile power and other standardized production. 2.Simple operating system, 7.5-inch color touch screen, user-friendly design, easy to understand. 3.Control system: PLC programming control, with fault alarm system. 4.Cooling device comes with solder pin and prolong life. 5.X-axis and Y-axis ball screw design, the stepper motor driven. Technical Parameters: model: TWSL-700 Power supply : 220V,50HZ 3.6Kw Use pressure : 0.3-0.8Mpa Dimensions: L1300 * W750 * H1300MM Machine weight : 200KG X Module travel : 0-450MM ,maximum 22pcs 18650 batteries Y Module travel : 0-200MM ,maximum 10pcs 18650 batteries Productivity: 6 parallel and 16 series;5 parallel and 16 series, 4 parallel and 16series, 3 parallel and 16 series, around 33 batteries/min. TWSL-800 18650 26650 32650 Battery Automatic Numerical Control Welding Machine, single panel & big size battery pack automatic spot welding machine Function: TWSL-800 is apower battery automatic spot welding machine, mainly for NB/Power- Tool/Gardening Tool/High Power/ energy storage battery / electric / electric motorcycle. Automobile, such as the use of lithium battery pack, can be used as a part of lithium battery production line. It with XY axis servo drive machine, ball screw transmission Still, ensure accuracy can be equipped with MIYACHI solder joint. MIYACHI series of spot welding power to ensure the reliability of the welding.Print-Rite power battery with circulating water cooling system of spot welding welding, improve welding Connection effect, prolong the service life of welding needle. Features: 1 .equipment power: 4KW, 220V AC input, 50HZ; 2.the use of air pressure; 0.4-0.8Mpa; 3.the scope of adaptation: adaptation: 18650,26650,32650, square cell (or similar) in series and parallel combination, realize automatic single side spot welding; 4 .suitable for nickel sheet width; no limit; 5 .suitable for nickel film thickness; 0.1MM---0.4MM (0.2-0.4MM thickness of nickel film need to be slotted); 6.production efficiency: 18650 32 pcs batteries/ min; 7.standard spot host: MB-30 spot machine; 8 .welding effect: Welding consistency is very good, uniform, beautiful, beautiful, pull more than 12KG; 9.control devices: 7.5 inch touch screen, 3 axis PLC programmer, 3 axis servo drive; 10.nickel belt with nickel strip, reduce waste; 11.equipment debugging is simple, easy to learn and easy to understand, fast changing model welding effective area:X axis:900MM,maximum 45pcs 18650 batteries Y axis 400MM,maximum 20pcs 18650 batteries welding power: 50W servo motor and screw drive 14.equipment comes with fault alarm, according to the prompt to clear the fault 15.devices can store 99 programming data, easy to produce free transfer Production process: 1.set up the parameters by group (0-99 group data) on the touch screen and save You can change the type of automatic retrieval, press the reset button, enter the standby state after reset 2 put the nickel piece in the mold 3.according to the requirements of the electric core into the mold 4.put the mold into the welding machine 5.press the start button to finish the spot welding, and then automatically exit. Solutions for options: Option 1.Internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+manual spot welding (TWSL-2118)+semi-finished tester Option 2.internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+manual spot welding (TWSL-50)+semi-finished tester+30V/70V/100V aging cabinet(1 point) + PVC Shrinking Machine (TW-4020) Option 3.Internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+five channel sorting(TWSL-500)+manual spot welding (TWSL-50)+semi-finished tester+30V/70V/100V aging cabinet(1 point)  + PVC Shrinking Machine (TW-4020) Option 4.Internal resistance(IRZ-200)+8 point capacity tester(TWSL-CT08/3A)+insulation paster(TWSL-350)+6 channel sorting(TWSL-600)+manual spot welding (TWSL-50)+semi-finished tester+30V/70V/100V aging cabinet(6 point)+ PVC Shrinking Machine (TW-4020) Option 5. Internal resistance(IRZ-200)+512 point capacity tester(TWSL-CT512/3A)+insulation paster(TWSL-350)+10/11/13 channel sorting(TWSL-1000/1100/1300)+Automatic Both Side spot welding machine (TWSL-700/700L)+30V/70V/100V aging cabinet(14 point) + battery PACK tester (TWSL-6000)  Option 6.  Internal resistance(IRZ-200)+512 point capacity tester(TWSL-CT512/3A)+insulation paster(TWSL-350)+10/11/13 channel sorting(TWSL-1000/1100/1300)+CCD detection before welding (TWSL-CCD01) + Automatic Both Side spot welding machine (TWSL-700/700L)+70V aging cabinet(14 point) + battery PACK tester (TWSL-6000)  battery pack line Jenny (Manager) Cel: +8618098919495