High Accuracy 18650 21700 Battery Capacity Tester For Cylindrical &prismatic&polymer Cells

High Accuracy 18650 Battery Tester 5v3a For 18650 Cylindrical Cell   Features  512 Channel Battery Testing Equipment is a popular newly developed battery testing system for Li-ion cells, LIPB, Ni-MH cells, Ni-Cd cells.This Battery Discharge Tester can be used as research machine, as cell positive /cathode pole material, battery cycle life testing etc.This Equipment also can be used in pilot run period and in quality assurance department, since it has functions as formatting cells, grading capacity, testing cells group,checking battery pack, and processing test data,etc. Current range: 0.025A-2A, 0.025A-3A, 0.025A-5A,0.025A-6A optional. Suitable for: Cylindrical cell or pouch cell. Supporting Software Functions: A) Graphic operation interface is used to display the data of voltage, current, time and capacity of each battery, and display the corresponding working status and abnormal conditions in various colors; B) Battery capacity indication of any section (up to 100 sections); C) Data points can be recorded according to the change conditions of voltage, current and time to form a complete charging and discharging curve data, and the time interval of curve data points is ≤ 4 Second; D) Carry out battery sorting function under various conditions (capacity, time, open circuit voltage, discharge platform, etc.); E) Automatically calculate constant current charging ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data; F) Set operator authority and operate in different levels; Display charge discharge curve and cycle chart;  Specifications Number of Device Channels The whole machine has  512 channels in total Workflow Control Mode Whole cabinet control Charging Mode Constant current and constant voltage Charging Cut-off Conditions Voltage, current, time, capacity Discharge Mode Constant current Discharge Cut-off Conditions Voltage, time and capacity Sampling Inspection Cycle ≤10s Voltage Measurement Range 0 ~ 5V, Resolution 1mV Battery Voltage Range Charging: 0 ~ 4.5V, Discharging: 4.5 ~ 2V Constant Voltage Range 3~4.5V Voltage Accuracy ±（0.05%RD+0.1%FS） Current Range Charge 0.025-2A/3A/5A/6A,Discharge 0.025-2A/3A/5A/6A, Resolution 1mA Current Accuracy ±（0.1%RD+0.1%FS） Time Frame Any setting within 0 ~ 30000 minutes, time unit is min Time Accuracy ≤±0.1% Fixture Type Cylindrical four wire fixture Fixture Spacing 35mm Support Battery Height 0~90mm Working Power Supply Three phase four wire system, AC380V ± 5%, 50Hz,  power consumption ≤14KW for 256 channel and ≤28KW for 512 channel Communication Mode RS485, baud rate 57600 Overall Dimension 720mm（Width）*500mm（Deep）*1840mm（High）for 256 channel1440mm（Width）*500mm（Deep）*1840mm（High） for 512 channel Work Environment Temperature: 0-40 ℃, relative temperature ≤ 85% Full Load Operating Current he maximum phase line is 30A, and the maximum zero line is 3A Equipment Starting Current The closing moment of air switch is about 60A Machine weight About 100kg for 256 channel/ 250 kg for 512 channel   Battery pack machine factory   512 Channel 18650/21700/22650/32650 33140 32135 Battery Cells Capacity Tester 5V 3A/5A/6A( 20A 30A 50A100A ) 18650 Lithium Cell 512 Channel Battery Capacity Tester Analyzer for Battery Charge and Discharge Testing Product Description 1. Cylindrical Cell Battery Capacity Analyzer mainly constitute by the computer system and control software, communication interface and battery detecting cabinet. Battery detecting cabinet comprises a fixture and placed the plate body of the fixture, charging, constant current and constant voltage source discharge constant current source, storage control circuit, current sampling circuit, voltage sampling circuit, the main control CPU, data memory, microcontroller programming and control panel. 2. Each battery test station has independent constant current and constant voltage power. 3. Using a unique constant current constant voltage power, constant current to constant voltage switch without impact, especially suitable for lithium ion battery charging and discharging requirements. 4. Per device consists of a set of completely independent MCU control system. 5. Specially used for chemical and capacity separation of cylindrical lopo battery. Customizable current range: 0-1 mA, 0-10 mA, 0-300 mA, 0-2 A, 0-3 A, 0-5 A, 0-20 A, 0-30 A, etc. Customizable voltage range: 0-5 V, 0-10 V, 0-20 V, 0-30 V, 0-50 V, 0-60 V, 0-150 V, 0-300 V, 0-500 V, etc. SPECIFICATIONS:  Capacity Tester 5V 3A/5A/6A( 20A 30A 50A100A ) Number of device channels 512 channels (full screen control) Sampling inspection interval ≤8 seconds/cycle Accuracy of current measurement ±0.1%FS Sampling Current Accuracy ±0.1%FS Voltage measurement range 0~5V,resolution 1mV Accuracy of voltage measurement ±0.1%FS Charge&discharge voltage range Charge:0~4.5V,discharge:4.5~2V(External connection length cannot exceed 2.5 meters) Constant voltage setting range 3 ~4.5V Constant pressure setting accuracy ±0.1%FS Time range 0~30000 minutes/step,accuracy:±0.1% Cooling method air cooling, upper air Fixture form Circuit connection between fixture and device is realized by terminal Working environment Temperature: 0~40°C, relative temperature ≤85% (No water condensation) Dimensions 1455mm (W) x 670mm (D) x 402mm (H) Power Supply Three-phase four-wire system,AC 380V±1 0%, 50HZ Full load power consumption ≤ 11KW Double Side Automatic Power Supply Battery Pack Spot Welding Machine Welding for 18650 21700 Cylindrical Cell Pack Automatic cylindrical battery cell welding machine with Servo Head TWSL-700 Product Features: 1>Machines which automatically Weld Nickel Sheet to Battery Cell Electrode. 2> Used for battery factories automatical production in power banks, laptops and ebikes, etc. 3> Do 2000pcs welding per hour.  4> Touch screen operation, easy and fast responding. 5> 0-1 worker to operate the machine, fast and with great efficiency.      Can be connected to other machines to proceed automatically. 6> Air cooling, manual programming & CAD drawing input available. 7> Overseas sales office in New Delhi, India. 8> 12 months warranty and life-time maintenance. Power supply:  220V, 50HZ, 3.6Kw Use pressure: 0.3-0.8Mpa X Module travel: 0-350MM maximum 18 cores Y Module travel: 0-135MM maximum 7 cores X-axis emission batteries: 18PCS within Y-axis discharge batteries Number: Within 7 lines Dimensions: L1300 * W750 * H1300MM Machine weight: 150KG Productivity: 6 & 16 string, 5 & 16 strings, strings 4 & 16, 3 & 16 series, about 2000 batteries/ hour Power: 10KVA (max) Input Frequency: 50/60Hz Input voltage: 220VAC Input gas source: 7-8 Bar (kg / cm) Primary current: 5-30A Primary short-circuit current: 1500A The whole structure: Integrated structure Welding arm structure: Telescopic swing control Electrodes to the body distance: 100 mm (Scalable adjustable) Cylinder diameter: 20 mm The number of pulses:   0-9 Pulse energy level: 0-99 Automatic compensation range: + 40V - 40V Panel digital display: 7-segment LED display External dimensions: 445 * 224 * 343 mm Gross weight: 42 kg TWSL-1000  18650 sorter 18650 automating sorting machine Features: TWSL-1000 sorter main achievement of the bulk material on a cylindrical battery, automatic cutting test, the robot automatic binning and other functions. Equipment according to the parameters set by the different battery internal resistance and voltage precision sorting by the robot to a different gear, this device implements the 10 sorting, and can be tested per hour with a group of about 80pcs/min batteries. No similar equipment in the industry is currently the fastest cylinder sorter. Batteries test data system to achieve database management, long-term preservation, traceability and strong. model: TWSL-1000 Single-phase 220VAC power: 0.8KW Working gas source: 0.5-0.6MPa Adaptation battery Dimensions: 18650 Separation efficiency: 80PPM above Weight: About 300KG Dimensions : Length 100 * W 140 * H 160cm instrument: Precision voltage resistance tester (optional) Sorting parameters: Open circuit voltage, AC resistance Open circuit voltage accuracy :± 0.1% rdg Display Resolution: 0.1mvΩ AC resistance accuracy: ± 0.5% rdg Display Resolution: 0.1mvΩ 5V3A/6A Lithium Battery Analyzer Charge and Discharge Machine and Battery Capacity Tester for Cylindrical Cell  Universal use 512 Channel 5V3A Cylindrical Battery Capacity Tester 18650 21700 battery cell Charge Discharge Analyzer Machine Specification: The test instrument can test the battery charge,discharge,short circuit protection,internal resistance,battery pressure drop,identification resistance,thermistor,capacity and so on,it takes only one second for the test The main function features of the equipment 1.Each device can perform constant current and constant voltage charge and constant current discharge test on 512 batteries that meet the voltage range. 2.Using the constant current-constant voltage power supply of the invention patent, there is no impact from constant current to constant voltage switching, which is especially suitable for the requirements of lithium ion battery charging. 3.The device uses an AVR single-chip computer as the control center. With the external sampling circuit, it can be controlled by the superior computer. When connected to the computer, it can save the full charge and discharge curve of all channels, and can also be separated from the upper computer and complete the operation through the control panel. Constant current constant voltage charge, constant current discharge test, time sorting and other work. 4.Each battery fully has its own constant current and constant voltage source, and its own loop does not affect each other 5.Real-time detection of each battery voltage, charging, the first constant current charging, when the battery voltage reaches the set value, will be smoothly transferred to constant voltage charging, to meet the set time or current termination conditions, the charge is over. During constant current discharge, when the battery voltage is lower than the set value, the discharge is completed and the corresponding battery indicator lights up. 6.With the power-off protection function, the original work flow can be continued after the call. 7.The power tube uses 50N06, suitable for batteries that require lower discharge voltages, such as lithium iron phosphate batteries. 8.The upper computer can set 32 process parameters and 256 cycles. Each host computer can connect 1 to 20 sets of single-chip microcomputer systems (10 sets or less are recommended). 9.Supporting software features. 10.a) Using graphic operation interface to display the data of each battery voltage, current, time, capacity, etc., and display the corresponding working status and abnormal conditions in various colors; 1.b) Any segmented battery capacity indication (up to 100 segments); 2.c) The data points can be recorded according to the voltage, current, and time variation conditions to form a complete charging and discharging curve data. The time interval of the curve data points is ≤ 4 seconds. 1.d) multiple conditions (capacity, time, open circuit voltage, discharge platform, etc.) for battery sorting; 1.e) automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data; 1. f) Operator authority settings, classification operations; 2. g) can display charge and discharge curve diagram, cycle diagram; battery pack line Jenny (Manager) Cel: +8618098919495   Number of device channels 512 channels (full screen control) Sampling inspection interval ≤8 seconds/cycle Accuracy of current measurement ±0.1%FS Sampling Current Accuracy ±0.1%FS Voltage measurement range 0~5V,resolution 1mV Accuracy of voltage measurement ±0.1%FS Charge&discharge voltage range Charge:0~4.5V,discharge:4.5~2V(External connection length cannot exceed 2.5 meters) Constant voltage setting range 3 ~4.5V Constant pressure setting accuracy ±0.1%FS Time range 0~30000 minutes/step,accuracy:±0.1% Cooling method air cooling, upper air Fixture form Circuit connection between fixture and device is realized by terminal Working environment Temperature: 0~40°C, relative temperature ≤85% (No water condensation) Dimensions 1455mm (W) x 670mm (D) x 402mm (H) Power Supply Three-phase four-wire system,AC 380V±1 0%, 50HZ Full load power consumption ≤ 11KW   TWSL-50 Feature 1 ,Imported energy storage power, welding voltage lockout technology to prevent network pressure fluctuations in the welding current. 2 ,Welding adjustable pulse width, small spatter, weld discoloration. 3 ,Discharge of imported IGBT module, enabling single-pulse and double pulse with multi-pulse welding. 4 ,Advanced technology: the continuous exchange with the international advanced inverter technology improvement and innovation. Dual pulse welding, welding and continuous pre-welding. Pre-solder oxide removal, remove debris, reducing the spark,, Continued solder joint cosmetics firm, no black, solder joints uniform size burr, does not affect the appearance of the product. 5 ,Adjustment easy to use: solder pin spacing is adjustable, suitable for fine components welding, alignment accuracy, high yield. Scope: 1 ,This professional welder power battery cells (thick slices 0.5mm or less) welding design. 2 ,18650 nickel belt suitable for welding, soldering connection battery, button cell welding, with guide wire between the nickel-metal hydride batteries and lithium batteries, nickel plate aluminum alloy nickel composite tape, appliance parts and welding wire, light bulbs foot welding, welding mobile power and cell phone battery. Welder MPU microcomputer control, pneumatically operated, small dimensions, with a protection circuit and alarm display, welding preheat wave, voltage fluctuation automatic compensation function to ensure stable energy output, high joint quality, easy maintenance, can improve the welding effectiveness. Suitable for high-volume production line. battery pack line Jenny (Manager) Cel: +8618098919495   Shenzhen TWSL New Energy Battery Equipment Co., Ltd TWSL-350 automatic labeling insulation paper Product name Sticker Label Machine Input gas source 0.4-0.8Mpa Function Style: step motor with pneumatic Input voltage: AC220V Sticker Matrials: Barley paper or PVC Sticker Matrials Size: Barley paper Maxium 350mm;Scroll Internal Diameter 72-75MM Adaptable Battery Cell 18650 battery Plus-n-Minus Power: Electric power or pneumatic Control Instrument: 7.5feet contact screen,PLC programming machine and step motor Electrodes to the body distance 100 mm (Scalable adjustable) Producivity: 65pcs/min; singal 4pcs External dimensions 1.3M*1M*1.3M Features: 1 . Stickers pasted stable, consistent, and long lasting. 2. Automatic failure alarm. 3. Easy to program, adjust, and opertate for new hands. 4. High Efficiency, fully automatic, saving labour cost. TWSL-700 18650 26650 32650 CNC Automatic Spot Welding Machine Features: 1.For 18650 battery. Mobile power and other standardized production. 2.Simple operating system, 7.5-inch color touch screen, user-friendly design, easy to understand. 3.Control system: PLC programming control, with fault alarm system. 4.Cooling device comes with solder pin and prolong life. 5.X-axis and Y-axis ball screw design, the stepper motor driven. Technical Parameters: model: TWSL-700 Power supply : 220V,50HZ 3.6Kw Use pressure : 0.3-0.8Mpa Dimensions: L1300 * W750 * H1300MM Machine weight : 200KG X Module travel : 0-450MM ,maximum 22pcs 18650 batteries Y Module travel : 0-200MM ,maximum 10pcs 18650 batteries Productivity: 6 parallel and 16 series;5 parallel and 16 series, 4 parallel and 16series, 3 parallel and 16 series, around 33 batteries/min. TWSL-800 18650 26650 32650 Battery Automatic Numerical Control Welding Machine, single panel & big size battery pack automatic spot welding machine Function: TWSL-800 is apower battery automatic spot welding machine, mainly for NB/Power- Tool/Gardening Tool/High Power/ energy storage battery / electric / electric motorcycle. Automobile, such as the use of lithium battery pack, can be used as a part of lithium battery production line. It with XY axis servo drive machine, ball screw transmission Still, ensure accuracy can be equipped with MIYACHI solder joint. MIYACHI series of spot welding power to ensure the reliability of the welding.Print-Rite power battery with circulating water cooling system of spot welding welding, improve welding Connection effect, prolong the service life of welding needle. Features: 1 .equipment power: 4KW, 220V AC input, 50HZ; 2.the use of air pressure; 0.4-0.8Mpa; 3.the scope of adaptation: adaptation: 18650,26650,32650, square cell (or similar) in series and parallel combination, realize automatic single side spot welding; 4 .suitable for nickel sheet width; no limit; 5 .suitable for nickel film thickness; 0.1MM---0.4MM (0.2-0.4MM thickness of nickel film need to be slotted); 6.production efficiency: 18650 32 pcs batteries/ min; 7.standard spot host: MB-30 spot machine; 8 .welding effect: Welding consistency is very good, uniform, beautiful, beautiful, pull more than 12KG; 9.control devices: 7.5 inch touch screen, 3 axis PLC programmer, 3 axis servo drive; 10.nickel belt with nickel strip, reduce waste; 11.equipment debugging is simple, easy to learn and easy to understand, fast changing model welding effective area:X axis:900MM,maximum 45pcs 18650 batteries Y axis 400MM,maximum 20pcs 18650 batteries welding power: 50W servo motor and screw drive 14.equipment comes with fault alarm, according to the prompt to clear the fault 15.devices can store 99 programming data, easy to produce free transfer Production process: 1.set up the parameters by group (0-99 group data) on the touch screen and save You can change the type of automatic retrieval, press the reset button, enter the standby state after reset 2 put the nickel piece in the mold 3.according to the requirements of the electric core into the mold 4.put the mold into the welding machine 5.press the start button to finish the spot welding, and then automatically exit. Good quality machine! We provide all kind of lithium battery pack assembly machines and solutions with good quality and services. Our products including: 1.IR tester 2.Capacity tester for cylindrical &prismatic&polymer cells 3.BMS tester 4.Sorting machine for common use 5.Insulation paper sticker machine 6.Manual spot welding machine 7.Automatic spot welding machine 8.Battery pack integrated tester 9.Battery pack charging discharging aging machine battery pack charge discharge tester 10v,15v,20v,30v,60v,70v,100v,120v capacity tester cell charge discharge tester 5v,3A/6A/10A/20A/30A/50A/60A/100A/200A Bms tester 16 series 20s 24s 32s,48Series battery pack function tester 100v 120A 200A 10.PVC shrinking machine 11. Nickel plate&PVC cutting machine 12.Laser welding machine 13.Wire bonding machine and etc. Machines used in manufacturers of batteries for Power bank, Solar,laptops,E-Vehicles, E-Bikes,E-Tools,toy,Mobile phones,Energy storage and etc. All of our products are good price. If you have any interesting,please contact with us you can reach me For more details pls contact : Jenny (Manager)  sales.jxcgroup（@) WhatsApp/WeChat/phone number is +8618098919495 Good quality machine! We provide all kind of lithium battery pack assembly machines and solutions with good quality and services. Our products including: 1.IR tester 2.Capacity tester for cylindrical &prismatic&polymer cells 3.BMS tester 4.Sorting machine for common use 5.Insulation paper sticker machine 6.Manual spot welding machine 7.Automatic spot welding machine 8.Battery pack integrated tester 9.Battery pack charging discharging aging machine battery pack charge discharge tester 10v,15v,20v,30v,60v,70v,100v,120v capacity tester cell charge discharge tester 5v,3A/6A/10A/20A/30A/50A/60A/100A/200A Bms tester 16 series 20s 24s 32s,48Series battery pack function tester 100v 120A 200A 10.PVC shrinking machine 11. Nickel plate&PVC cutting machine 12.Laser welding machine 13.Wire bonding machine and etc. Machines used in manufacturers of batteries for Power bank, Solar,laptops,E-Vehicles, E-Bikes,E-Tools,toy,Mobile phones,Energy storage and etc. All of our products are good price. If you have any interesting,please contact with us you can reach me For more details pls contact : Jenny (Manager)  sales.jxcgroup（@) WhatsApp/WeChat/phone number is +8618098919495