Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
Fiberglass process pipeline
Product Description
Common specifications and
models of FRP process piping
1: Can be made according to
user needs
2: Can be produced according
to national standards
specifications(mm)
specifications(mm)
Ø400*L12500
Ø800*L12500
Ø1500*L12500
Ø2500*L12500
Ø500*L12500
Ø900*L12500
Ø1600*L12500
Ø2600*L12500
Ø600*L12500
Ø1000*L12500
Ø2000*L12500
Ø3200*L12500
Ø700*L12500
Ø1200*L12500
Ø2200*L12500
Ø4000*L12500
Ø1400*L12500
Ø1800*L12500
Ø3000*L12500
Ø3500*L12500
FRP process pipe is a new
type of composite pipe with excellent performance. It has the incomparable performance of other traditional pipes (metal pipes, concrete pipes, plastic pipes).
Characteristics of FRP
Process Pipeline1. Process glass fiber reinforced
plastic pipes have excellent physical properties. The specific gravity of glass fiber reinforced plastic pipes is 1.8-2.1, which is about 1/4 of steel. It has higher specific strength than steel,
cast iron and plastics. The weight of glass fiber reinforced plastic pipes is generally not greater than that of steel pipes of the same specification. 1/3, excellent physical and mechanical
properties. In addition, the expansion coefficient of FRP pipe is roughly equivalent to that of steel, and the thermal conductivity is only 0.5% of steel. It is a good thermal and electrical
insulator.2. Process glass steel pipe is resistant
to chemical corrosion, has a long service life, and is suitable for conveying various acids, alkalis, salts and organic solvents and other different media.3. Process FRP pipes have excellent
hydraulic properties, and hydraulic properties are one of the important features of FRP pipes. Excellent hydraulic characteristics means that the fluid head loss is small, and a smaller pipe
diameter or smaller power delivery pump can be selected, thereby reducing the initial investment of pipeline engineering, saving power, and reducing operating costs. The inner surface of FRP is
quite smooth. Generally, the surface roughness can be 0.008, which can almost be regarded as a "hydraulic smooth pipe". During operation, the inner surface of steel pipe, cast iron pipe, cement
pipe, etc. often undergoes local corrosion and becomes more and more Rough, while the glass fiber reinforced plastic has always maintained the smooth surface of the new tube.4. Process FRP pipe installation and
maintenance costs are low. Generally speaking, FRP pipe does not require special anti-corrosion treatment; the insulation layer can be thinned, or even no additional insulation treatment; the
pipeline is relatively light, the lifting equipment is small in tonnage, and the power consumption is low. The length of FRP pipes is longer than that of cement pipes and cast iron pipes, and the
joints are relatively reduced, which will reduce installation and maintenance costs. This has been proved by many engineering practices at home and abroad.5. The design flexibility of process FRP
pipes is large, and the modification period is short. FRP is made of fiber reinforced material impregnated with a resin matrix, wound layer by layer on a core mold according to specific process
conditions and properly cured. The tube wall is a layered structure, which can be changed by changing the resin system or using different Reinforcement materials are used to adjust various
physical and chemical properties of FRP pipes to adapt to different media and working conditions to make FRP pipes with different pressure levels or with certain special properties. The short
modification period is a remarkable feature of fiber-wound composite materials, which cannot be compared with isotropic metal pipes.