A8011, H14 Lacquered Aluminum Foil For Pharmaceutical Cap

Yinhe supplies coated aluminium to manufacturers of Pharmaceutical seals for injectable products, vial caps, tear-off and pilfer-proof caps. In the pharmaceutical sector, aluminium caps protect the essential features of the products and preserve them from humidity, oxygen and microbiological contaminants. Coated aluminium can be used in the pharmaceutical sector thanks to its properties: sterilization resistance, perfect printability, excellent isotropy. More than this aluminum has excellent resistance to corrosion. Our company offers: FDA approved epoxy coating resistant to degreasing through chlorinated degreaser and sterilisation in water vapour at 121°C for 30 minutes or in oven at 180°C for 90 minutes. Yinhe cares about Sustainability. We continuously improve the resource optimization to increase production efficiency. We work hard to reduce consumption of water, energy and paper to control and limit emissions and effectively manage harmful substances and waste. Product Name Coated Aluminum Foil/Coil Alloy 8011 Temper H14, H16 Thickness 0.15mm ~ 0.3mm Width 26mm ~1200mm Diameter 300mm ~ 1500mm Coil ID 76/152 mm Tensile Strength 135~165MPA Elongation > 2.5% Earring Rate < 2% Surface Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use. Test Items Autoclave resistance / Isopropanol / Ethanol / Hgcl2 / Rigid test /ect Application Closures, Caps, Vial Seals, especially for Pharmaceutical industry MOQ 3 tons Certification ISO9001,SGS,FDA