100W LENS LED STREET LIGHT

Model LT-100WSL-LENS Certification ISO, CE, RoHS, LM80, TM Wattage  100 Weight 3.110 Kg Number of LEDs 100 Optical lens Polycarbonate 90 degree lens LED Brand OSRAM/Cree/Edison/Crescent/Kwality/Samsung (As per requirements) Power Consumption 100W LED Lumens Efficiency 140 Lumens / Watt Maximum Lumens 14000 lm Beam Angle 90 Degree with Lens LED Working Voltage +6.2 VDC LED Working Current 150mA Input Voltage 85 – 300 VAC(Auto cut off above 310V)(Protection up to 440 V) Operating Frequency 50/60 Hz Power Factor >0.95 Ambient Temp(Ta) 50⁰C Case Temp(Tc) 75⁰C CRI 80 Efficiency >87% Color White/Warm White (As per order) Color Temperature 2700-6500K (As per order) Body Type Pressure die cast Aluminum alloy for housing gear, Extruded aluminum lamp housing (heat sink) for Better heat transmission. IP rating IP65/IP66 Working Hours >50000 hours Surge Protection Inbuilt Driver surge protection – 4 KV Extra SPD surge protection – 10 KV (As per Requirement) Electrical Protections for LED Driver - Single shot no-load latching protection /   output short-circuit protected    with auto-recovery -Under voltage protection -Output short circuit protection - Auto-recovering thermal shutdown with large hysteresis protects Both components and printed circuit board - No damage during brown-out conditions LED PCB Detail Thickness 1.6 mm (±5% tolerance) PCB material – Aluminum-copper Copper layer thickness – Standard 0.35 micron Copper conductivity – 1 Watt Additional Features - Plug & Play Device - Corrosion free Body Material, Dust proof, Rugged - Easy to Install, Easy to maintain- Suitable in any Environmental Condition - Save Up to 70% of Electricity  Terminology Earth            – Green or Yellow Line Positive – Red or Brown Neutral         – Blue or Black