ÇBS PLASMATT

Definition: ÇBS PLASMATT is matt,high covering power,strong penetration,easy spreading, high breathability,water based, emulsion top coat interior paint. Areas of Use: Safely use on interior surfaces such as plasters, renders, concrete surfaces and worn out painted surfaces. Surface Preparation before Application New Satin Plaster Surfaces: Youshould wait for 72 hours at least subsequent to the plaster practice on the satin plaster new surfaces. The surfaces which have formed on surfaces should be cleaned following the sandpapering process. There-after, ÇBS İzobinder should be applied diluted with 1/7 ratio water as 1 layer with approximate consumption of 0,080 gr/m2. After that, with 2 layers 0,250 gr/m2 consumption and waiting for 5 hours between the layers at a minimum, ÇBS Plasmatt should be applied. New Cement-based Rendered Surfaces: I f there are cracks having formed on the surfaces, they should be fixed with thin or thick putty based on the size of the crack. Thereafter, surfaces should be cleaned and be prepared for primer phase. Based on how you want it, one of 1/7 ÇBS İzobinder or ÇBS Beyaz Astar (White Binder Primer) should be used as 1 layer. After that, with 2 layers 0,250 gr/m2 consumption and waiting for 5 hours between the layers at a minimum, ÇBS Plasmatt should be applied. Old or Worn Out Painted Surfaces: The old, loose, swelled paint films on surfaces must be cleaned/removed (if there  is any). If local repairs are required, they need to be done and be primered. Thereafter, ÇBS Beyaz Astar (White Binder Primer) must be applied on all cleaned surfaces as 1 layer with approximate  consumption  of  0,100  gr/m2.  After waiting for 5 hoursat a minimumbetweenthe layersand at consumption of 2 layersat 0,200 gr/m2, should be used. Consumption:            NewSurfaces: 250gr/ mt²(twocoat) Old surfaces: 200gr / mt² (two coat) Packaging Form: 2,5 L. - 7,5 L. and 15 L. plastic bucket