Nylon,Polyamide 6,High Viscosity,General Level,4.0 Viscosity,PA6

PA 6 / Nylon 6 is a synthetic thermoplastic linear polyamide with many other names such as Nylon 6, Polycaprolactam, Polyamide 6 and etc. It is commonly used in manufacturing industry because of its excellent properties:   - high strength and stiffness at high temperature   - good impact strength, even at low temperature   - very good flow for easy processing   - good abrasion and wear resistance   - excellent fuel and oil resistance   - good fatigue resistance   - excellent surface appearance and good processability   - good electrical insulating properties   - environmentally friendly, 100% recyclable For many applications, PA 6 is modified using co-monomers or stabilizers during polymerization to introduce new chain end or functional groups, which changes the reactivity and chemical properties. This is often done to change the material dye-ability, mechanical properties or flame retardance.   Other information:     CAS Number: 25038-54-4     ECHA InfoCard: 100.124.824     PubChem CID: 32775     UNII: 14GUK8I73Z     CompTox Dashboard (EPA): DTXSID6049694  PA 6 can be processed by all common melt processing techniques such as Injection Molding, Extrusion, 3D Printing, Film stretching, Spinning and etc. Relative Viscosity is one of the most important parameter when choosing PA 6 material for different applications. Generally speaking, high viscosity material is suitable for tube drawing, blow moulding, film blowing processes; medium viscosity material is suitable for direct injection moulding and injection moulding after material modification; low viscosity material is suitable for thin wall product injection moulding. Moresu MS400 MS400 is a bright nylon 6 raw chip with relative viscosity of 4.0.  The nylon produce produce by MS400 has high tensile strength, good air resistance, wide temperature resistance range, good oil resistance and organic solvent resistance. It is especially suitable for extrusion of nylon corrugated pipes, rods and plates with large size or profiles with complex structure. It also has wide range of applications for packaging. This product is supplied in dry state, generally cylindrical granules and packed in moisture-proof bags. The standard packing is 25kg PE bags. General properties for reference:   Density:                                     1.14-1.15 g/cm3   Balanced water absorption:      3.5% Has good wear resistance, self-lubrication and solvent resistance.   Tensile strength:                        > 60.0Mpa   Elongation:                                > 30%   Bending strength:                      90.0Mpa   Notched impact strength:          > 5(KJ/m2) The product is normally in natural color.  We also supply PA6 raw chip with different relative viscosity for different product applications.